370LB003G12

370-003 Water-Tight Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling 370 F S 003 M 16 10 C 6 37 CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile A = 90° B = 45° S = Straight Basic Part No. Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (B, C, E) Cable Entry (Tables IV, V) Shell Size (Table I) Finish (Table II) A-F-H-L-S ROTATABLE COUPLING Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 6) A Thread (Table I) O-Ring Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 6) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) .88 (22.4) Max E (Table III) G (Table III) F (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE B (Table IV) P J STYLE C Medium Duty (Table IV) Clamping Bars STYLE E Medium Duty (Table V) N (See Note 4) L Cable Range K Cable Range K Cable Range M © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 37 - Page 14 with Strain Relief Low Profile - Rotatable Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Dash No. 03 04 06 08 10 12 16 20 24 28 32 J Max 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.281 (32.5) 1.281 (32.5) 1.406 (35.7) 1.656 (42.1) 1.906 (48.4) 1.906 (48.4) 2.000 (50.8) K Max .812 (20.6) .937 (23.8) 1.062 (27.0) 1.188 (30.2) 1.312 (33.3) 1.562 (39.7) 1.750 (44.5) 2.250 (57.2) 2.375 (60.3) 2.625 (66.7) 2.812 (71.4) TABLE iV: CABLE ENTRY Cable Range N Ref Min Max .135 (3.4) .156 (4.0) .219 (5.6) .188 (4.8) .203 (5.2) .312 (7.9) .285 (7.2) .281 (7.1) .438 (11.1) .350 (8.9) .312 (7.9) .531 (13.5) .390 (9.9) .375 (9.5) .625 (15.9) .460 (11.7) .500 (12.7) .750 (19.1) .625 (15.9) .510 (13.0) .938 (23.8) .938 (23.8) .695 (17.7) 1.250 (31.8) .715 (18.2) 1.000 (25.4) 1.375 (34.9) .915 (23.2) 1.250 (31.8) 1.625 (41.3) 1.070 (27.2) 1.500 (38.1) 1.875 (47.6) P Max 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.094 (27.8) 1.219 (31.0) 1.219 (31.0) 1.344 (34.1) 1.547 (39.3) 1.547 (39.3) 1.734 (44.0) TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) F Max 1.810 (46.0) 1.869 (47.5) 1.929 (49.0) 2.359 (59.9) 2.469 (62.7) 2.659 (67.5) 2.659 (67.5) 2.872 (72.9) 2.872 (72.9) 2.905 (73.8) 3.005 (76.3) 3.315 (84.2) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.820 (46.2) 1.940 (49.3) 1.960 (49.8) 2.369 (60.2) 2.459 (62.5) 2.629 (66.8) 2.629 (66.8) 2.802 (71.2) 2.802 (71.2) 2.955 (75.1) 3.205 (81.4) 3.255 (82.7) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options Dash No. 03 04 06 08 10 12 16 20 24 28 32 L Max .739 (18.8) .739 (18.8) .739 (18.8) .739 (18.8) .791 (20.1) .880 (22.4) .901 (22.9) 1.031 (26.2) 1.250 (31.8) 1.250 (31.8) 1.312 (33.3) TABLE V: CABLE ENTRY Cable Range M Max Min Max .812 (20.6) .156 (4.0) .219 (5.6) .937 (23.8) .188 (4.8) .312 (7.9) 1.062 (27.0) .281 (7.1) .438 (11.1) 1.188 (30.2) .312 (7.9) .531 (13.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 1.562 (39.7) .500 (12.7) .750 (19.1) 1.750 (44.5) .625 (15.9) .938 (23.8) 2.250 (57.2) .938 (23.8) 1.250 (31.8) 2.375 (60.3) 1.000 (25.4) 1.375 (34.9) 2.625 (66.7) 1.250 (31.8) 1.625 (41.3) 2.812 (71.4) 1.500 (38.1) 1.875 (47.6) CAGE Code 06324 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Saddles are bottomed on Clamp Ears. 5. Interface O-Ring not supplied with Connector Designator A. 6. Consult factory for shorter lengths on straight backshells. © 2005 Glenair, Inc. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 37 - Page 15 37 370-003 Water-Tight Cable Sealing Backshell