370LP024NF14

370-024 Submersible Split Shell Cable Sealing Backshell with Strain Relief Low Profile - Self-Locking - Rotatable Coupling 370 F P 024 M 16 10 H Product Series Connector Designator Angle and Profile P = 45° R = 90° Basic Part No. Strain Relief Style (H, A, M, D) Cable Entry (Tables X, XI) Shell Size (Table I) Finish (Table II) 37 A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING CONNECTOR DESIGNATORS O-Ring A Thread (Table I) F (Table III) or L (Table IV) E Typ (Table I) G (Table III) or M (Table IV) H (Table III) or N (Table IV) J (Table III) or P (Table IV) Anti-Rotation Device Typ. K (Table III) or R (Table IV) Use Table IV data when E diameter exceeds F diameter. STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Entry Cable Range V Cable Range Y Cable Range Y Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 37 - Page 26 with Strain Relief Low Profile - Self-Locking - Rotatable Coupling TABLE III: DIMENSIONS F Max 1.188 (30.2) 1.188 (30.2) 1.188 (30.2) 1.188 (30.2) 1.438 (36.5) 1.438 (36.5) 1.438 (36.5) 1.688 (42.9) 1.688 (42.9) G Max 1.938 (49.2) 1.938 (49.2) 1.938 (49.2) 1.938 (49.2) 2.062 (52.4) 2.062 (52.4) 2.062 (52.4) 2.188 (55.6) 2.188 (55.6) H Max 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.281 (57.9) 2.281 (57.9) 2.281 (57.9) 2.406 (61.1) 2.406 (61.1) Shell Size Conn. Desig. A-F-L-S H 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 J Max 1.938 (49.2) 1.938 (49.2) 1.938 (49.2) 1.938 (49.2) 2.062 (52.4) 2.062 (52.4) 2.062 (52.4) 2.188 (55.6) 2.188 (55.6) R Max 2.281 (57.9) 2.406 (61.1) 2.406 (61.1) 2.406 (61.1) 2.656 (67.5) 2.656 (67.5) 2.906 (73.8) K Max 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.156 (54.8) 2.281 (57.9) 2.281 (57.9) 2.281 (57.9) 2.406 (61.1) 2.406 (61.1) See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. L Dash Max No. 08 1.438 (36.5) 10 1.688 (42.9) 12 1.688 (42.9) 16 1.688 (42.9) 20 2.188 (55.6) 24 2.188 (55.6) 28 2.688 (68.3) Dash No. 04 06 08 10 12 16 20 24 28 T Max .780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .811 (20.6) .905 (23.0) 1.092 (27.7) 1.124 (28.5) 1.399 (35.5) TABLE IV: DIMENSIONS M N P Max Max Max 2.062 (52.4) 2.281 (57.9) 2.062 (52.4) 2.188 (55.6) 2.406 (61.1) 2.188 (55.6) 2.188 (55.6) 2.406 (61.1) 2.188 (55.6) 2.188 (55.6) 2.406 (61.1) 2.188 (55.6) 2.438 (61.9) 2.656 (67.5) 2.438 (61.9) 2.438 (61.9) 2.656 (67.5) 2.438 (61.9) 2.688 (68.3) 2.906 (73.8) 2.688 (68.3) 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. Interface O-Ring not supplied with connector designator A. TABLE X: CABLE ENTRY Cable Range V Min Max Max .125 (3.2) .312 (7.9) .957 (24.3) .250 (6.4) .437 (11.1) 1.145 (29.1) .387 (9.8) .562 (14.3) 1.332 (33.8) .350 (8.9) .625 (15.9) 1.332 (33.8) .500 (12.7) .750 (19.1) 1.551 (39.4) .625 (15.9) .937 (23.8) 1.770 (45.0) .875 (22.2) 1.250 (31.8) 2.113 (53.7) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options TABLE XI: CABLE ENTRY Dash W X Y Z Cable Range No. Max Max Max Max Min ** Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 281.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) 32* .187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.437 (36.5) 1.875 (47.6) 1 * Not available in Style M clamp. ** Not Applicable Style D © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 37 - Page 27 37 370-024 Submersible Split Shell Cable Sealing Backshell