370LS006C10

370-006 Splash-Proof Cable Sealing Backshell with Strain Relief Low Profile - Direct Coupling 37 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 CONNECTOR DESIGNATORS * 370 F S 006 M 16 10 L 6 Product Series Connector Designator Angle and Profile A = 90° B = 45° S = Straight Basic Part No. Length * Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (L,G) Cable Entry (Tables V, VI) Shell Size (Table I) Finish (Table II) .312 (7.9) Max * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) DIRECT COUPLING Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) A Thread (Table I) B (Table I) O-Rings STYLE 2 (STRAIGHT See Note 1) J E (Table (Table III) IV) B (Table I) J (Table III) F (Table IV) B (Table I) G (Table IV) H (Table IV) STYLE L Light Duty (Table V) .850 (21.6) Max Cable Range STYLE G Light Duty (Table VI) .072 (1.8) Max Cable Range K L © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 37 - Page 22 with Strain Relief Low Profile - Direct Coupling TABLE III: FRONT ADAPTER J Max - Conn. Designator Shell A-E-F Size J-H-L-S D-B-G-K C 08/09 1.180 (30.0) 1.250 (31.8) 10/11 1.180 (30.0) 1.250 (31.8) 12/13 1.180 (30.0) 1.250 (31.8) 1.735(44.1) 14/15 1.180 (30.0) 1.250 (31.8) 1.915(48.6) 16/17 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 18/19 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 20/21 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 22/23 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 24/25 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 28/29 1 1.560 (39.6) 1.915(48.6) 32/33 610 (40.9) . 1.750 (44.5) 1.915(48.6) 36 1.610 (40.9) 1.750 (44.5) 1.915(48.6) 40 1.610 (40.9) 2.190 (55.6) 1.915(48.6) See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. Function S only. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. Elbow Size 01 02 03 04 05 06 07 08 09 10 TABLE IV: ELBOW DIMENSIONS E G F Max Max Max .567 (14.4) 2.030 (51.6) .636 (16.2) .567 (14.4) 2.030 (51.6) .636 (16.2) .630 (16.0) 2.090 (53.1) .710 (18.0) .692 (17.6) 2.150 (54.6) .731 (18.6) .755 (19.2) 2.240 (56.9) .825 (21.0) .848 (21.5) 2.340 (59.4) .988 (25.1) 1.036 (26.3) 2.540 (64.5) 1.087 (27.6) 1.130 (28.7) 2.680 (68.1) 1.325 (33.7) 1.130 (28.7) 2.680 (68.1) 1.325 (33.7) 1.130 (28.7) 2.680 (68.1) 1.325 (33.7) H Max 2.040 (51.8) 2.040 (51.8) 2.160 (54.9) 2.180 (55.4) 2.250 (57.2) 2.340 (59.4) 2.510 (63.8) 2.620 (66.5) 2.620 (66.5) 2.620 (66.5) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE V: CABLE ENTRY Cable Range K Max Min Max .781 (19.8) .062 (1.6) .125 (3.2) .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .250 (6.4) .500 (12.7) 1.218 (30.9) .375 (9.5) .625 (15.9) 1.343 (34.1) .500 (12.7) .750 (19.1) 1.468 (37.3) .625 (15.9) .875 (22.2) 1.593 (40.5) .625 (15.9) 1.000 (25.4) 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.843 (46.8) .875 (22.2) 1.250 (31.8) Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE VI: CABLE ENTRY Cable Range L Max Min Max .593 (15.1) .062 (1.6) .125 (3.2) .718 (18.2) .125 (3.2) .250 (6.4) .843 (21.4) .250 (6.4) .375 (9.5) .968 (24.6) .375 (9.5) .500 (12.7) 1.109 (28.2) .500 (12.7) .625 (15.9) 1.218 (30.9) .625 (15.9) .750 (19.1) 1.343 (34.1) .750 (19.1) .875 (22.2) 1.468 (37.3) .875 (22.2) 1.000 (25.4) 1.593 (40.5) 1.000 (25.4) 1.125 (28.6) 1.718 (43.6) 1.125 (28.6) 1.250 (31.8) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 37 - Page 23 37 370-006 Splash-Proof Cable Sealing Backshell