370SA004G14

370-004 Water-Tight Cable Sealing Backshell with Strain Relief Low Profile - Direct Coupling 37 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 6 CONNECTOR DESIGNATORS * 370 F S 004 M 16 10 C 6 Product Series Connector Designator Strain Relief Style (B, C, E) Angle and Profile A = 90° B = 45° S = Straight Basic Part No. Cable Entry (Tables V, VI) Shell Size (Table I) Finish (Table II) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 5) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) DIRECT COUPLING Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 5) A Thread (Table I) B (Table I) O-Ring STYLE 2 (STRAIGHT See Note 1) (Table III) (Table IV) J E G J (Table III) (Table IV) B (Table I) F (Table IV) B (Table I) H (Table IV) STYLE B (Table V) M K STYLE C Medium Duty (Table V) Clamping Bars N (See Note 3) STYLE E Medium Duty (Table VI) P Cable Range L Cable Range L Cable R © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 37 - Page 18 with Strain Relief Low Profile - Direct Coupling TABLE III: FRONT ADAPTER J Max - Conn. Designator Shell A-E-F Size J-H-L-S D-B-G-K C 08/09 1.180 (30.0) 1.250 (31.8) 10/11 1.180 (30.0) 1.250 (31.8) 12/13 1.180 (30.0) 1.250 (31.8) 1.735(44.1) 14/15 1.180 (30.0) 1.250 (31.8) 1.915(48.6) 16/17 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 18/19 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 20/21 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 22/23 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 24/25 1.380 (35.0) 1.560 (39.6) 1.915(48.6) 28/29 1 1.560 (39.6) 1.915(48.6) 32/33 610 (40.9) . 1.750 (44.5) 1.915(48.6) 36 1.610 (40.9) 1.750 (44.5) 1.915(48.6) 40 1.610 (40.9) 2.190 (55.6) 1.915(48.6) See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 04 .567 (14.4) 1.187 (30.1) .636 (16.2) 06 .630 (16.0) 1.250 (31.8) .710 (18.0) 08 .692 (17.6) 1.312 (33.3) .731 (18.6) 10 .755 (19.2) 1.655 (42.0) .825 (21.0) 12 .848 (21.5) 1.765 (44.8) .988 (25.1) 16 1.036 (26.3) 1.952 (49.6) 1.087 (27.6) 20 1.130 (28.7) 2.098 (53.3) 1.325 (33.7) 24 1.255 (31.9) 2.155 (54.7) 1.337 (34.0) 28 1.317 (33.5) 2.250 (57.2) 1.827 (46.4) 32 1.348 (34.2) 2.343 (59.5) 2.027 (51.5) H Max 1.200 (30.5) 1.320 (33.5) 1.340 (34.0) 1.660 (42.2) 1.750 (44.5) 1.925 (48.9) 2.033 (51.6) 2.200 (55.9) 2.450 (62.2) 2.450 (62.2) Dash No. 03 04 06 08 10 12 16 20 24 28 32 K Max 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.281 (32.5) 1.281 (32.5) 1.406 (35.7) 1.656 (42.1) 1.906 (48.4) 1.906 (48.4) 2.000 (50.8) TABLE V: CABLE ENTRY Cable Range L N Max Ref Min Max .812 (20.6) .135 (3.4) .156 (4.0) .219 (5.6) .937 (23.8) .203 (5.2) .188 (4.8) .312 (7.9) 1.062 (27.0) .285 (7.2) .281 (7.1) .438 (11.1) 1.188 (30.2) .350 (8.9) .312 (7.9) .531 (13.5) 1.312 (33.3) .390 (9.9) .375 (9.5) .625 (15.9) 1.562 (39.7) .460 (11.7) .500 (12.7) .750 (19.1) 1.750 (44.5) .510 (13.0) .625 (15.9) .938 (23.8) 2.250 (57.2) .695 (17.7) .938 (23.8) 1.250 (31.8) 2.375 (60.3) .715 (18.2) 1.000 (25.4) 1.375 (34.9) 2.625 (66.7) .915 (23.2) 1.250 (31.8) 1.625 (41.3) 2.812 (71.4) 1.070 (27.2) 1.500 (38.1) 1.875 (47.6) M Max 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.094 (27.8) 1.219 (31.0) 1.219 (31.0) 1.344 (34.1) 1.547 (39.3) 1.547 (39.3) 1.734 (44.0) Dash No. 03 04 06 08 10 12 16 20 24 28 32 P Max .739 (18.8) .739 (18.8) .739 (18.8) .739 (18.8) .791 (20.1) .880 (22.4) .901 (22.9) 1.031 (26.2) 1.250 (31.8) 1.250 (31.8) 1.312 (33.3) TABLE VI: CABLE ENTRY Cable Range R Max Min Max .812 (20.6) .156 (4.0) .219 (5.6) .937 (23.8) .188 (4.8) .312 (7.9) 1.062 (27.0) .281 (7.1) .438 (11.1) 1.188 (30.2) .312 (7.9) .531 (13.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 1.562 (39.7) .500 (12.7) .750 (19.1) 1.750 (44.5) .625 (15.9) .938 (23.8) 2.250 (57.2) .938 (23.8) 1.250 (31.8) 2.375 (60.3) 1.000 (25.4) 1.375 (34.9) 2.625 (66.7) 1.250 (31.8) 1.625 (41.3) 2.812 (71.4) 1.500 (38.1) 1.875 (47.6) 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. Function S only. 2. Metric dimensions (mm) are indicated in parentheses. 3. Saddles are bottomed on Clamp Ears. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. Printed in U.S.A. © 2005 Glenair, Inc. CAGE Code 06324 www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 37 - Page 19 37 370-004 Water-Tight Cable Sealing Backshell