377HS014XB21

Backshells and Accessories Product Series Connector Designator H = MIL-DTL-38999 Series III & IV Angular Function S = Straight T = 45° Solid Elbow W = 90° Solid Elbow Basic Number Finish Symbol (Table III) Shell Size (See Table I) Anti-rotation Device 1.59 (40.4) Max for Fiber Optic MIL-DTL-38999 Series III & IV Connectors 377 H S 014 XM 11 06 4 G G = Gland Nut T = Tubing Adapter, Glenair Types E, F, P & T K = Tubing Adapter with Nut Glenair Types E, F, P & T TB = Tubing Adapter supplied with Band, Glenair Types E, F, P & T TN = Tubing Adapter with Nut Glenair Types E, F, P & T (Omit for Standard Shrink Boot Adapter) Length in 1/2 Inch Increments (See Note 3) Optional Entry Size, See Table II (Omit for Standard, See Table I) Band Termination See P/N Development Anti-rotation Device Grommet Key Indicator (Color White) Grommet Key (8 At 45 ) 377-014 Composite Thermoplastic Backshell A Thread Length (See Note 3) C Ref Split Helical Convoluted Tubing (Not Supplied) B SYM T - TUBING ADAPTER 1.000 Max (25.4) SYM S - STRAIGHT Positive Stop L Hex Flats .190 (4.8) J Approx on C L Nut M Ref M Ref C Ref F N G SHRINK BOOT ADAPTER (STD.) Anti-rotation Device SYM G GLAND NUT SYM K - PEEK TUBING ADAPTER WITH NUT SYM TN - PLASTIC TUBING ADAPTER WITH NUT O-Ring K Rad Ref SYM T 45 º D .120 (3.0) Dia See Table I For No. of Holes (See Note 4) A DE CB Cavity Ident. Insert Ident. See Table I 8 7 6 1 2 3 4 .20 Dia 8 Places Applicable To 25-8 Only H Approx On C L 5 25-8 HOLE PATTERN E 1.0 (25.4) Radius Ref K Rad Ref Mating Nut Must Bottom On Shoulder Stop SYM W 90º Printed in U.S.A. © 2006 Glenair, Inc. www.glenair.com CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com I-6 for Fiber Optic MIL-DTL-38999 Series III & IV Connectors TABLE I: SHELL SIZE Shell Size 11 13 15 17 19 21 23 25 25-8 25-37 Shell Size 11 13 15 17 19 21 23 25 25-8 25-37 A Thread ISO Metric M15 x 1 - 6H M18 x 1 - 6H M22 x 1 - 6H M25 x 1 - 6H M28 x 1 - 6H M31 x 1 - 6H M34 x 1 - 6H M37 x 1 - 6H M37 x 1 - 6H M37 x 1 - 6H A Thread ISO Metric M15 x 1 - 6H M18 x 1 - 6H M22 x 1 - 6H M25 x 1 - 6H M28 x 1 - 6H M31 x 1 - 6H M34 x 1 - 6H M37 x 1 - 6H M37 x 1 - 6H M37 x 1 - 6H B Max 1.000 (25.4) 1.120 (28.4) 1.250 (31.8) 1.380 (35.1) 1.500 (38.1) 1.620 (41.0) 1.750 (44.5) 1.880 (47.8) 1.880 (47.8) 1.880 (47.8) B Max 1.000 (25.4) 1.120 (28.4) 1.250 (31.8) 1.380 (35.1) 1.500 (38.1) 1.620 (41.0) 1.750 (44.5) 1.880 (47.8) 1.880 (47.8) 1.880 (47.8) Standard Conduit Size 3/8 7/16 1/2 5/8 3/4 7/8 1 1 1 - 1/4 1 - 1/4 Standard Conduit Size 3/8 7/16 1/2 5/8 3/4 7/8 1 1 1 - 1/4 1 - 1/4 D Max 1.780 (45.2) 1.840 (46.7) 1.900 (48.3) 1.970 (50.0) 2.110 (53.6) 2.070 (52.6) 2.140 (54.4) 2.190 (55.6) 2.190 (55.6) 2.190 (55.6) J Approx. 2.090 (53.1) 2.210 (56.1) 2.330 (59.2) 2.440 (62.0) 2.500 (63.5) 2.640 (67.1) 2.750 (69.9) 2.870 (72.9) 2.870 (72.9) 2.870 (72.9) E Max 1.930 (49.0) 1.980 (50.3) 2.080 (52.8) 2.140 (54.4) 2.180 (55.4) 2.250 (57.2) 2.310 (58.7) 2.190 (55.6) 2.190 (55.6) 2.190 (55.6) K Ref 1.200 (30.5) 1.260 (32.0) 1.320 (33.5) 1.380 (35.1) 1.430 (36.3) 1.490 (37.8) 1.550 (39.4) 1.620 (41.1) 1.620 (41.1) 1.620 (41.1) F Max 1.330 (33.8) 1.390 (35.3) 1.450 (36.8) 1.510 (38.4) 1.540 (39.1) 1.160 (40.9) 1.670 (42.4) 1.730 (43.9) 1.730 (43.9) 1.730 (43.9) L Flats .938 (23.8) .938 (23.8) .938 (23.8) 1.250 (31.8) 1.250 (31.8) 1.500 (38.1) 1.500 (38.1) 1.812 (46.0) 1.812 (46.0) 1.812 (46.0) G Max 1.560 (39.6) 1.620 (41.1) 1.680 (42.7) 1.740 (44.2) 1.770 (45.0) 1.840 (46.7) 1.890 (48.0) 1.960 (49.8) 1.960 (49.8) 1.960 (49.8) M Ref .320 (81.3) .540 (13.7) .540 (13.7) .760 (19.3) .760 (19.3) 1.000 (25.4) 1.000 (25.4) 1.270 (32.3) 1.270 (32.3) 1.270 (32.3) H Approx. 2.230 (56.6) 2.280 (57.9) 2.450 (62.2) 2.470 (62.7) 2.540 (64.5) 2.640 (67.1) 2.760 (70.1) 2.840 (72.1) 2.840 (72.1) 2.840 (72.1) N Max 1.380 (35.1) 1.380 (35.1) 1.380 (35.1) 1.560 (39.6) 1.560 (39.6) 1.810 (46.0) 1.810 (46.0) 2.120 (53.8) 2.120 (53.8) 2.120 (53.8) Insert Ident 11-2 13-4 15-5 17-8 19-11 21-16 23-21 25-29 25-8 25-37 Insert Ident 11-2 13-4 15-5 17-8 19-11 21-16 23-21 25-29 25-8 25-37 No. of Holes 2 4 5 8 11 16 21 29 8 37 No. of Holes 2 4 5 8 11 16 21 29 8 37 377-014 Composite Thermoplastic Backshell TABLE I: SHELL SIZE (CONTINUED) TABLE III: FINISH SYM – XB XM XW MATERIAL Composite Composite Composite Composite No Plating No Plating, Black Color Electroless Nickel - Backshell, No Plating on Coupling Nut or Rear Entry Components – Amber Color Cadmium Plate/Olive Drab over Electroless Nickel Backshell No Plating on Coupling Nut or Rear Components – Amber Color FINISH Entry Size 03 04 05 06 07 08 10 11 13 15 17 TABLE II: ENTRY SIZE C Ref .219 (5.6) .236 (6.0) .250 (6.4) .338 (8.6) .394 (10.0) .519 (13.2) .644 (16.4) .644 (16.4) .772 (19.6) .894 (22.7) 1.102 (28.0) Optional Conduit Size Ref 9/32 5/32 3/8 7/16 1/2 5/8 3/4 3/4 7/8 1 1 - 1/4 APPLICATION NOTES 1. Assembly identified with manufacturer’s name and P/N, space permitting. 2. Glenair 600 series Backshell assembly tools are recommended for assembly and installation. 3 Standard min. order length 1.5 inch, consult factory for shorter lengths. 4 For sealing plugs see Glenair drawing 687-142. 5. Material: Adapters, Elbows, Ferrules, Coupling Nut, Nut: Hi- Grade Engineering thermoplastic/ see Table III Grommet, O-Ring: Fluorosilicone/ N.A. Anti-Rotation Device: Corrosion Resistant Material/ N.A. 6. Metric dimensions (mm) are indicated in parentheses. © 2006 Glenair, Inc. www.glenair.com CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com I-7 Backshells and Accessories