380AB014NF16

380-014 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Direct Coupling - Low Profile 38 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 CONNECTOR DESIGNATORS * 380 F S 014 M 16 10 A 6 Product Series Connector Designator Angle and Profile A = 90° B = 45° S = Straight Basic Part No. A Thread (Table I) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (H, A, M, D) Cable Entry (Tables X, XI) Shell Size (Table I) Finish (Table II) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) DIRECT COUPLING TYPE D INDIVIDUAL OR OVERALL SHIELD TERMINATION Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) STYLE 2 (STRAIGHT See Note 1) J (Table III) B (Table I) J (Table III) G (Table IV) E (Table IV) F (Table IV) B (Table I) B (Table I) H (Table IV) STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 76 with Strain Relief Type D - Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 03 .630 (16.0) 1.730 (43.9) .636 (16.2) 04 .630 (16.0) 1.730 (43.9) .636 (16.2) 06 .630 (16.0) 1.730 (43.9) .710 (18.0) 08 .692 (17.6) 1.790 (45.5) .731 (18.6) 10 .755 (19.2) 1.880 (47.8) .825 (21.0) 12 .848 (21.5) 1.990 (50.5) .988 (25.1) 16 1.036 (26.3) 2.180 (55.4) 1.087 (27.6) 20 1.130 (28.7) 2.330 (59.2) 1.325 (33.7) 24 1.255 (31.9) 2.380 (60.5) 1.337 (34.0) 28 1.317 (33.5) 2.480 (63.0) 1.827 (46.4) 32 1.348 (34.2) 2.570 (65.3) 2.027 (51.5) H Max 1.680 (42.7) 1.680 (42.7) 1.800 (45.7) 1.820 (46.2) 1.890 (48.0) 2.040 (51.8) 2.150 (54.6) 2.260 (57.4) 2.430 (61.7) 2.680 (68.1) 2.680 (68.1) Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE X: CABLE ENTRY T V Cable Range Max Max Min Max .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) See Inside Back Cover for Additional Finish Options TABLE XI: CABLE ENTRY Dash W X Y Z No. Max Max Max Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) * Not available in Style M clamp. © 2005 Glenair, Inc. 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter Cable Range lengths on Min ** Max straight .156 (4.0) .250 (6.4) backshells. .188 (4.8) .312 (7.9) 5. When using .281 (7.1) .438 (11.1) Connector .344 (8.7) .562 (14.3) Designator B .375 (9.5) .625 (15.9) refer to pages 18 .438 (11.1) .750 (19.1) and 19 for part .562 (14.3) .938 (23.8) number develop.750 (19.1) 1.250 (31.8) ment. .781 (19.8) 1.375 (34.9) .969 (24.6) 1.625 (41.3) 1.125 (28.6) 1.875 (47.6) 1.469 (37.3) 2.375 (60.3) ** Not Applicable Style D Printed in U.S.A. CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 77 38 380-014 EMI/RFI Non-Environmental Backshell