380AD007NF20

380-007 EMI/RFI Non-Environmental Backshell Light-Duty with Strain Relief Type C - Rotatable Coupling - Low Profile 38 CONNECTOR DESIGNATORS 380 F S 007 M 16 05 L 6 Product Series Connector Designator Angle and Profile A = 90° B = 45° S = Straight Basic Part No. A Thread (Table I) C Typ. (Table I) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (L, G) Cable Entry (Tables IV, V) Shell Size (Table I) Finish (Table II) Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) A-F-H-L-S ROTATABLE COUPLING TYPE C OVERALL SHIELD TERMINATION Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) E (Table III) STYLE 2 (STRAIGHT See Note 1) .88 (22.4) Max G (Table III) F (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE L Light Duty (Table IV) .850 (21.6) Max Now Available with the “NESTOR” Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. Add “-445” to Specify This AS85049 Style “N” Coupling Interface. STYLE G Light Duty (Table V) .072 (1.8) Max Cable Range K Cable Entry L © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 30 Light-Duty with Strain Relief Type C - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 36 40 E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) F Max 1.680 (42.7) 1.740 (44.2) 1.800 (45.7) 1.890 (48.0) 2.000 (50.8) 2.190 (55.6) 2.190 (55.6) 2.340 (59.4) 2.340 (59.4) 2.390 (60.7) 2.490 (63.2) 2.580 (65.5) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.781 (45.2) 1.901 (48.3) 1.921 (48.8) 1.991 (50.6) 2.081 (52.9) 2.251 (57.2) 2.251 (57.2) 2.361 (60.0) 2.361 (60.0) 2.531 (64.3) 2.781 (70.6) 2.781 (70.6) TABLE Il: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE IV: CABLE ENTRY Cable Range K Max Min Max .781 (19.8) .062 (1.6) .125 (3.2) .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .250 (6.4) .500 (12.7) 1.218 (30.9) .375 (9.5) .625 (15.9) 1.343 (34.1) .500 (12.7) .750 (19.1) 1.468 (37.3) .625 (15.9) .875 (22.2) 1.593 (40.5) .625 (15.9) 1.000 (25.4) 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.843 (46.8) .875 (22.2) 1.250 (31.8) Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE V: CABLE ENTRY Cable Entry L Max Max .125 (3.2) .593 (15.1) .250 (6.4) .718 (18.2) .375 (9.5) .843 (21.4) .500 (12.7) .968 (24.6) .625 (15.9) 1.109 (28.2) .750 (19.1) 1.218 (30.9) .875 (22.2) 1.343 (34.1) 1.000 (25.4) 1.468 (37.3) 1.125 (28.6) 1.593 (40.5) 1.250 (31.8) 1.718 (43.6) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 31 38 380-007 EMI/RFI Non-Environmental Backshell