380AT100XM18

EMI/RFI Shield Termination Backshell with Self-Locking Rotatable Coupling and Qwik Clamp CONNECTOR DESIGNATOR: Angle and Profile S - Straight W - 90° Elbow T - 45° Elbow Product Series 380 - EMI/RFI Non Environmental Backshells with Strain Relief 380-100 Composite Cone and Ring Style Composite Backshells A A F L H G U MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) MIL-DTL-38999 Series III and IV MIL-DTL-28840 DG123 and DG123A Finish Symbol (See Table III) Basic Part Number Cable Entry (See Table IV) 380 H S 100 XM 19 28 B SELF-LOCKING ROTATABLE COUPLING STANDARD PROFILE Connector Designator A, F, L, H, G and U Connector Shell Size (See Table II) F E C Anti-Decoupling Device 1.380 (35.1) J G D Shell Size For Connector Designator A F/L H G U 08 08 09 – – 10 10 11 – 08 12 12 13 11 10 14 14 15 13 12 16 16 17 15 14 18 18 19 17 16 20 20 21 19 18 22 22 23 – 20 24 24 25 23 22 28 – – 25 24 TABLE II: CONNECTOR SHELL SIZE ± .06 .69 .75 .81 .88 .94 .97 1.06 1.13 1.19 1.34 E (1.5) (17.5) (19.1) (20.6) (22.4) (23.9) (24.6) (26.9) (28.7) (30.2) (34.0) ± .09 .88 1.00 1.13 1.31 1.38 1.44 1.63 1.75 1.88 2.13 F (2.3) (22.4) (25.4) (28.7) (33.3) (35.1) (36.6) (41.4) (44.5) (47.8) (54.1) ± .09 1.06 1.13 1.19 1.25 1.31 1.34 1.44 1.50 1.56 1.66 G Cable Range H J Cable Range E F (2.3) (26.9) (28.7) (30.2) (31.8) (33.3) (34.0) (36.6) (38.1) (39.6) (42.2) Max Entry Dash No.** 08 12 16 20 24 28 32 36 40 44 H US PATENT 5211576 **Consult factory for additional entry sizes available. See introduction for additional connector front-end details. G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-48 EMI/RFI Shield Termination Backshell with Self-Locking Rotatable Coupling and Qwik Clamp Anti-Decoupling Device K L J Cable Range TABLE II: CONNECTOR SHELL SIZE (CONT.) Shell Size For Connector Designator Max Entry K L H A & F/L Dash No. * ± .06 (1.5) ± .06 (1.5) 09 08 08 .72 (18.3) .88 (22.4) 11 10 12 .75 (19.1) .94 (23.9) 13 12 16 .75 (19.1) 1.00 (25.4) 15 14 20 .76 (19.3) 1.03 (26.2) 17 16 24 .78 (19.8) 1.06 (26.9) 19 18 28 .79 (20.1) 1.07 (27.2) 21 20 32 .82 (20.8) 1.09 (27.7) 23 22 36 .86 (21.8) 1.14 (29.0) 25 24 40 .92 (23.4) 1.17 (29.7) * Consult factory for additional entry sizes available. H NOTES 1. 2. 3. Coupling nut supplied unplated. See Table I in Intro for front-end dimensional details. Metric dimensions (mm) are in parentheses and are for reference only Entry Code 08 12 16 20 24 28 32 36 40 44 TABLE IV: CABLE ENTRY Cable Range H J (Max) (Max) Minimum Maximum .72 (18.3) .87 (22.1) .10 (2.5) .25 (6.4) .91 (23.1) 1.01 (25.7) .20 (5.1) .38 (9.7) 1.09 (27.7) 1.11 (28.2) .33 (8.4) .50 (12.7) 1.22 (31.0) 1.11 (28.2) .45 (11.4) .63 (15.9) 1.34 (34.0) 1.11 (28.2) .52 (13.2) .75 (19.1) 1.53 (38.9) 1.26 (32.0) .64 (16.3) .88 (22.2) 1.72 (43.7) 1.41 (35.8) .77 (19.6) 1.00 (25.4) 1.85 (47.0) 1.41 (35.8) .86 (21.8) 1.13 (28.6) 1.41 (35.8) 1.97 (50.0) .98 (24.9) 1.25 (31.8) 1.53 (38.9) 1.13 (28.6) 1.38 (34.9) 2.09 (53.1) TABLE III: FINISH Symbol XM Finish Description 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel XMT XW © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-49 Composite Backshells 380-100 Composite Cone and Ring Style A B C D E F G