380AW099XW24

EMI/RFI Shield Termination Backshell with Self-Locking Coupling Nut and Strain Relief CONNECTOR DESIGNATOR: Angle and Profile S - Straight W - 90° Elbow T - 45° Elbow Product Series 380 - EMI/RFI Non Environmental Backshells with Strain Relief Strain Relief Style C - Clamp N - Nut 380-099 Composite Cone and Ring Style Composite Backshells A A F L H G U MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) MIL-DTL-38999 Series III and IV MIL-DTL-28840 DG123 and DG123A Finish Symbol (See Table III) Basic Part Number Cable Entry (See Table IV) 380 H S 099 XM 19 20 C B SELF-LOCKING ROTATABLE COUPLING STANDARD PROFILE Anti-Decoupling Device Connector Designator A, F, L, H, G and U Connector Shell Size (See Table II) C 1.25 (31.8) F .69 (17.5) Max. E D Cable Range Typical H G Clamp Nut J .13 (3.3) Max. E F Shell Size For Connector Designator A F/L H G U ± .06 .69 08 08 09 – – .75 10 10 11 – 08 .81 12 12 13 11 10 .88 14 14 15 13 12 .94 16 16 17 15 14 .97 18 18 19 17 16 20 20 21 19 18 1.06 22 22 23 – 20 1.13 24 24 25 23 22 1.19 28 – – 25 24 1.34 TABLE II: CONNECTOR SHELL SIZE E (1.5) ± .09 .88 (17.5) (19.1) 1.00 (20.6) 1.13 (22.4) 1.31 (23.9) 1.38 (24.6) 1.44 (26.9) 1.63 (28.7) 1.75 (30.2) 1.88 (34.0) 2.13 F (2.3) ± .09 (2.3) (22.4) 1.19 (30.2) (25.4) 1.25 (31.8) (28.7) 1.31 (33.3) (33.3) 1.38 (35.1) (35.1) 1.44 (36.6) (36.6) 1.47 (37.3) (41.4) 1.56 (39.6) (44.5) 1.63 (41.4) (47.8) 1.69 (42.9) (54.1) 1.78 (45.2) G Max Entry Dash No.** 10 12 14 16 20 20 22 24 28 32 TABLE III: FINISH Symbol XM Finish Description 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM 2000 Hour Corrosion Resistant Cadmium/ Olive Drab over Electroless Nickel XMT XW G **Consult factory for additional entry sizes available. See Introduction for additional connector front-end details. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-46 EMI/RFI Shield Termination Backshell with Self-Locking Coupling Nut and Strain Relief Clamp Anti-Decoupling Device K .130 (3.3) Max. L Nut .690 (17.5) Max. J NOTES 1. 2. 3. Coupling nut supplied unplated. See Table I in Intro for front-end dimensional details. Metric dimensions (mm) are in parentheses and are for reference only Clamp Cable Range Typ. H TABLE II: CONNECTOR SHELL SIZE (CONT.) Shell Size For Connector Designator Max Entry K L H A & F/L Dash No. * ± .06 (1.5) ± .06 (1.5) 09 08 10 .72 (18.3) .88 (22.4) 11 10 12 .75 (19.1) .94 (23.9) 13 12 14 .75 (19.1) 1.00 (25.4) 15 14 16 .76 (19.3) 1.03 (26.2) 17 16 .78 (19.8) 1.06 (26.9) 20 19 18 .79 (20.1) 1.07 (27.2) 20 21 20 22 .82 (20.8) 1.09 (27.7) 23 22 24 .86 (21.8) 1.14 (29.0) 25 24 28 .92 (23.4) 1.17 (29.7) * Consult factory for additional entry sizes available. TABLE IV: CABLE ENTRY Cable Range * H J Maximum ±.06 (1.5) ±.06 (1.5) Minimum (6.4) .94 (23.9) .80 (20.3) .16 (4.0 ) .25 .38 (9.7) 1.17 (29.7) .93 (23.6) .29 (5.1) .44 (11.2) 1.28 (32.5) 1.06 (26.9) .40 (10.1) .63 (15.9) 1.41 (35.8) 1.22 (31.0) .52 (12.7) .69 (17.5) 1.50 (38.1) 1.24 (31.5) .58 (14.7) .75 (19.1) 1.56 (39.6) 1.37 (34.8) .64 (16.3) .88 (22.2) 1.69 (42.9) 1.49 (37.8) .72 (18.3) 1.81 (46.0) 1.62 (41.1) .79 (20.0) 1.00 (25.4) 1.91 (48.5) 1.68 (42.7) .89 (20.3) 1.13 (28.6) 2.02 (51.3) 1.82 (46.2) .96 (24.4) 1.25 (31.8) * Cable range equals diameter of cable outer jacket. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. Dash No. 10 12 14 16 18 20 22 24 28 32 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-47 Composite Backshells 380-099 Composite Cone and Ring Style A B C D E F G