380FC111NF24

380-111 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Self-Locking - Rotatable Coupling - Split Shell 38 CONNECTOR DESIGNATORS 380 F D 111 M 24 12 A Product Series Connector Designator Angle and Profile C = Ultra-Low Split 90° D = Split 90° F = Split 45° H (Table III) Strain Relief Style (H, A, M, D) Cable Entry (Table X, XI) Shell Size (Table I) Finish (Table II) Basic Part No. A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING TYPE D INDIVIDUAL OR OVERALL SHIELD TERMINATION A Thread (Table I) E Typ. (Table I) F (Table III) M* G (Table III) J (Table III) Split 90° Split 45° 1.00 (25.4) Max Max Wire Bundle (Table III, Note 1) K* *(Table III) AntiRotation Device (Typ.) L (Table III) STYLE 2 (See Note 1) STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X Ultra LowProfile Split 90° STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 82 with Strain Relief Type D - Self-Locking - Rotatable Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: DIMENSIONS Shell F Max Size 08/09 .596 (15.1) 10/11 .656 (16.7) 12/13 .716 (18.2) 14/15 .776 (19.7) 16/17 .836 (21.2) 18/19 .906 (23.0) 20/21 .976 (24.8) 22/23 1.036 (26.3) 24/25 1.096 (27.8) G Max 1.590 (40.4) 1.650 (41.9) 1.720 (43.7) 1.750 (44.5) 1.850 (47.0) 1.910 (48.5) 1.970 (50.0) 2.030 (51.6) 2.090 (53.1) H Max .836 (21.2) .906 (23.0) .966 (24.5) 1.026 (26.1) 1.086 (27.6) 1.156 (29.4) 1.216 (30.9) 1.276 (32.4) 1.336 (33.9) J Max 1.530 (38.9) 1.590 (40.4) 1.660 (42.2) 1.690 (42.9) 1.790 (45.5) 1.850 (47.0) 1.910 (48.5) 1.970 (50.0) 2.030 (51.6) K Max .496 (12.6) .426 (10.8) .426 (10.8) .436 (11.1) .576 (14.6) .796 (20.2) .796 (20.2) .696 (17.7) .696 (17.7) L Max 1.780 (45.2) 1.940 (49.3) 1.940 (49.3) 2.010 (51.1) 2.060 (52.3) 2.090 (53.1) 2.090 (53.1) 2.240 (56.9) 2.240 (56.9) M Function C Max Max Wire Bundle .837 (21.3) .250 (6.4) .887 (22.5) .375 (9.5) .887 (22.5) .375 (9.5) .987 (25.1) .500 (12.7) 1.137 (28.9) .625 (15.9) 1.337 (34.0) .625 (15.9) 1.337 (34.0) .625 (15.9) 1.337 (34.0) .750 (19.1) 1.337 (34.0) .750 (19.1) Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE X: CABLE ENTRY T V Cable Range Max Max Min Max .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied (not available in Function C). Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Angular function "C", low-profile split elbow, not available with "S" connector designator. TABLE XI: CABLE RANGE Dash W X Y Z Cable Range No. Max Max Max Max Min ** Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) * Not available in Style M clamp. ** Not Applicable Style D © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 83 38 380-111 EMI/RFI Non-Environmental Backshell