380FJ019NF18

380-019 EMI/RFI Non-Environmental Backshell with Strain Relief Type E - Direct Coupling - Standard Profile 38 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 CONNECTOR DESIGNATORS * 380 F J 019 M 24 12 D A Product Series Connector Designator Angle and Profile H = 45° J = 90° See page 38-92 for straight Basic Part No. Finish (Table II) Strain Relief Style (H, A, M, D) Termination (Note 4) D = 2 Rings T = 3 Rings Cable Entry (Tables X, XI) Shell Size (Table I) DIRECT COUPLING TYPE E INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION A Thread (Table I) J (Table III) E (Table IV) J (Table III) G (Table IV) B Typ. (Table I) F (Table IV) H (Table IV) STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 94 with Strain Relief Type E - Direct Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS E Elbow F G Max Size Max Max 03 .639 (16.2) .950 (24.1) .750 (19.1) 04 .664 (16.9) .980 (24.9) .810 (20.6) 06 .688 (17.5) 1.000 (25.4) .870 (22.1) 08 .705 (17.9) 1.030 (26.2) .920 (23.4) 10 .732 (18.6) 1.050 (26.7) .980 (24.9) 12 .748 (19.0) 1.060 (26.9) 1.020 (25.9) 16 .800 (20.3) 1.120 (28.4) 1.140 (29.0) 20 1.041 (26.4) 1.320 (33.5) 1.480 (37.6) 24 1.041 (26.4) 1.320 (33.5) 1.480 (37.6) 28 1.092 (27.7) 1.360 (34.5) 1.610 (40.9) 32 1.138 (28.9) 1.410 (35.8) 1.720 (43.7) H Max 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) 1.250 (31.8) 1.310 (33.3) 1.330 (33.8) 1.470 (37.3) 1.780 (45.2) 1.780 (45.2) 1.870 (47.5) 1.980 (50.3) Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel TABLE X: CABLE ENTRY Cable Range V Dash T Max No. Max Min Max .957 (24.3) .780 (19.8) .125 (3.2) .312 (7.9) 04 .250 (6.4) .437 (11.1) 06 .780 (19.8) 1.145 (29.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) 08 .350 (8.9) .625 (15.9) 10 .780 (19.8) 1.332 (33.8) 12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 .875 (22.2) 1.250 (31.8) 20 1.092 (27.7) 2.113 (53.7) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE XI: CABLE ENTRY Dash W Z Y X No. Max Max Max Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) * Not available in Style M clamp. © 2005 Glenair, Inc. CAGE Code 06324 See Inside Back Cover for Additional Finish Options 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. Consult factory for shorter lengths on straight backshells. 4. Designate Symbol T for 3 ring termination of indiCable Range vidual and Max Min ** overall braid. .156 (4.0) .250 (6.4) Designate D .188 (4.8) .312 (7.9) for standard 2 .281 (7.1) .438 (11.1) ring termina.344 (8.7) .562 (14.3) tion of individual or .375 (9.5) .625 (15.9) overall braid. .438 (11.1) .750 (19.1) .562 (14.3) .938 (23.8) 5. When using Connector .750 (19.1) 1.250 (31.8) Designator B .781 (19.8) 1.375 (34.9) refer to pages .969 (24.6) 1.625 (41.3) 18 and 19 for 1.125 (28.6) 1.875 (47.6) part number 1.469 (37.3) 2.375 (60.3) development. ** Not Applicable Style D Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 95 38 380-019 EMI/RFI Non-Environmental Backshell