380FM105NF14

380-105 EMI/RFI Non-Environmental Backshell with Strain Relief Type F - Self-Locking - Rotatable Coupling - Full Radius Profile 38 CONNECTOR DESIGNATORS 380 F S 105 M 16 08 A 6 Product Series Connector Designator Angle and Profile M = 45° N = 90° S = Straight Basic Part No. Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (H, A, M, D) Cable Entry (Table X, XI) Shell Size (Table I) Finish (Table II) Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING TYPE F INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION A Thread Length ± .060 (1.52) Minimum Order Length 2.0 Inch (Table I) (See Note 4) E Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) 1.00 (25.4) Max Anti-Rotation Device (Typ.) F (Table III) G (Table III) H (Table III) J (Table III) STYLE 2 (45° & 90° See Note 1) STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 118 with Strain Relief Type F - Self-Locking - Rotatable Coupling - Full Radius Profile TABLE III: ELBOW DIMENSIONS Shell Size F G H Conn. Desig. Max Max Max A-F-L-S H .875 (22.2) 1.281 (32.5) 08 09 .968 (24.6) .938 (23.8) 1.406 (35.7) 10 11 1.031 (26.2) 12 13 1.094 (27.8) 1.000 (25.4) 1.531 (38.9) 14 15 1.156 (29.4) 1.062 (27.0) 1.656 (42.1) 16 17 1.219 (31.0) 1.125 (28.6) 1.781 (45.2) 18 19 1.250 (31.8) 1.156 (29.4) 1.906 (48.4) 20 21 1.312 (33.3) 1.219 (31.0) 2.031 (51.6) 22 23 1.344 (34.1) 1.250 (31.8) 2.156 (54.8) 24 25 1.406 (35.7) 1.312 (33.3) 2.281 (57.9) 1.500 (38.1) 1.625 (41.3) 2.531 (64.3) 28 TABLE II: STANDARD FINISHES J Max 1.188 (30.2) 1.312 (33.3) 1.438 (36.5) 1.562 (39.7) 1.688 (42.9) 1.812 (46.0) 1.938 (49.2) 2.062 (52.4) 2.188 (55.6) 2.625 (66.7) GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE X: CABLE ENTRY Cable Range V T Max Max Min Max .957 (24.3) .780 (19.8) .125 (3.2) .312 (7.9) .250 (6.4) .437 (11.1) .780 (19.8) 1.145 (29.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) .350 (8.9) .625 (15.9) .780 (19.8) 1.332 (33.8) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) .875 (22.2) 1.250 (31.8) 1.092 (27.7) 2.113 (53.7) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. Dash W X No. Max Max 03* .437 (11.1) .760 (19.3) 04* .437 (11.1) .760 (19.3) 06* .500 (12.7) .760 (19.3) 08 .563 (14.3) .760 (19.3) 10 .563 (14.3) .760 (19.3) 12 .563 (14.3) .760 (19.3) 16 .656 (16.7) 1.073 (27.3) 20 .656 (16.7) 1.323 (33.6) 24 .656 (16.7) 1.323 (33.6) 28 1.188 (30.2) 1.572 (39.9) 32* 1.187 (30.1) 1.572 (39.9) 40* 1.125 (28.6) 1.572 (39.9) * Not available in Style M clamp. TABLE XI: CABLE ENTRY Z Y Cable Range Max Max Max Min ** .630 (16.0) .156 (4.0) .250 (6.4) .843 (21.4) .755 (19.2) .188 (4.8) .312 (7.9) .906 (23.0) .942 (23.9) .281 (7.1) .438 (11.1) 1.093 (27.8) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) ** Not Applicable Style D © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 119 38 380-105 EMI/RFI Non-Environmental Backshell