380FS131XMT14

EMI/RFI Shield Termination Backshell with Strain-Relief Clamp and Rotatable Coupling CONNECTOR DESIGNATOR: Angle and Profile S - Straight Product Series 380 - EMI/RFI Non Environmental Backshells with Strain Relief Finish Symbol (See Table III) Strain Relief Style SB - Shrink Boot Groove SBT - Shrink Boot Groove with boot supplied (Omit for none) A F L H MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) MIL-DTL-38999 Series III and IV Basic Part Number 380 H S 131 XM 15 - 01 SB ROTATABLE COUPLING Connector Designator A, F, L and H Connector Shell Size (See Table II) Cable Entry (See Table IV) 1.300 +.02 (33.0 + 0.5) .390 (10.0) E F D DIA Equally Spaced Holes to Accommodate Knit Braid 107-044 Self-Locking Rotatable Coupling Optional Shrink Boot Groove TABLE II: SHELL SIZE Shell Shell Size Max Entry Size Max Entry F/L H Code** Code** A 08 09 00 08 01 10 11 01 10 02 12 13 02 12 03 14 15 03 14 04 16 17 04 16 05 18 19 05 18 06 20 21 06 20 07 22 23 07 22 08 24 25 08 24 09 APPLICATION NOTES 1. 2. 3. 4. 5. Coupling nut and saddle bars supplied unplated. TABLE IV: CABLE ENTRY E F Number Entry D +.020 (0.50) +.020 (0.50) of Holes Code** +.010 (0.25) .512 (13.0) .880 (22.4) 2 00 .268 (6.8) .512 (13.0) .880 (22.4) 2 01 .354 (9.0) .512 (13.0) .940 (23.9) 2 02 .472 (12.0) .630 (16.0) 1.170 (29.7) 2 03 .591 (15.0) .630 (16.0) 1.280 (32.5) 2 04 .709 (18.0) .630 (16.0) 1.410 (35.8) 2 05 .837 (21.3) .630 (16.0) 1.500 (38.1) 2 06 .945 (24.0) .630 (16.0) 1.560 (39.6) 4 07 1.063 (27.0) .630 (16.0) 1.690 (42.9) 4 08 1.191 (30.3) .630 (16.0) 1.820 (46.2) 4 09 1.319 (33.5)  Oval Holes, .256 (6.5) x .512 (13.0) Oval Holes, .315 (8.0) x .512 (13.0)  Circular Holes, .512 (13.0) Diameter. TABLE III: FINISH Symbol XM XMT XW Finish Description 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant Ni-PTFE, NickelFluorocarbon Polymer. 1000 Hour GreyTM 2000 Hour Corrosion ResistantCadmium/Olive Drab over Electroless Nickel Printed in U.S.A. Metric dimensions (mm) are in parentheses and are for reference only. Consult factory for additional entry sizes available. For angled part requirements, use in conjuncion with Glenair 327-060 Extenders. See Table I in Intro for additional connector front-end dimensions. © 2009 Glenair, Inc. CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-53 Composite Backshells 380-131 Composite Knit-Braid Style A B C D E F G