380FS132XM18

O-Ring Equipped Shield Termination Backshell with Shrink Boot Adapter and Rotatable Coupling CONNECTOR DESIGNATOR: Angle and Profile S - Straight Product Series 380 - EMI/RFI Non Environmental Backshells with Strain Relief Finish Symbol (See Table III) Strain Relief Style SB - Shrink Boot Groove SBT - Shrink Boot Groove with boot supplied (Omit for none) 380-132 Composite Knit-Braid Style EMI/RFI Composite Backshells A A F L H MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) MIL-DTL-38999 Series III and IV Basic Part Number 380 H S 132 XM 15 - 01 SB ROTATABLE COUPLING B O-Ring supplied on Connector Code H only Connector Designator A, F, L and H Connector Shell Size (See Table II) Cable Entry (See Table IV) 1.300 +.02 (33.0 + 0.5) .906 (23.0) APPLICATION NOTES 1. Coupling nut and saddle bars supplied unplated. Consult factory for additional entry sizes available. For angled part requirements, use in conjuncion with Glenair 327-060 Extenders. See Table I in Intro for additional front-end dimensional details. C D DIA 2. 3. 4. D Self-Locking Rotatable Coupling Equally Spaced Holes to Accommodate Knit Braid 107-044 .130/.142 (3.3/3.6) E TABLE II: SHELL SIZE Shell Shell Size Max Entry Size Max Entry F/L H Code** Code** A 08 09 00 08 01 10 11 01 10 02 12 13 02 12 03 14 15 03 14 04 16 17 04 16 05 18 19 05 18 06 20 21 20 06 07 22 23 22 07 08 24 25 24 08 09 F TABLE IV: CABLE ENTRY Entry D Number Code** +.010 (0.25) of Holes 00 .268 (6.8) 2 01 .354 (9.0) 2 02 .472 (12.0) 2 03 .591 (15.0) 2 04 .709 (18.0) 2 05 .837 (21.3) 2 06 .945 (24.0) 2 07 1.063 (27.0) 4 08 1.191 (30.3) 4 09 1.319 (33.5) 4 Oval Holes, .256 (6.5) x .512 (13.0) Oval Holes, .315 (8.0) x .512 (13.0)  Circular Holes, .512 (13.0) Diameter.   TABLE III: FINISH Symbol XM Finish Description 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel XMT XW G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-54