380HH010NF20

380-010 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Direct Coupling - Standard Profile 38 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 3 CONNECTOR DESIGNATORS * 380 F J 010 M 16 05 F Product Series Connector Designator Angle and Profile H = 45° J = 90° See page 38-58 for straight Strain Relief Style (F, G) Cable Entry (Table V, VI) Shell Size (Table I) Finish (Table II) Basic Part No. DIRECT COUPLING TYPE D INDIVIDUAL OR OVERALL SHIELD TERMINATION A Thread (Table I) J (Table III) E (Table IV) J (Table III) G (Table IV) B Typ. (Table I) F (Table IV) H (Table IV) STYLE F Light Duty (Table V) .416 (10.5) Max Cable Range STYLE G Light Duty (Table VI) .072 (1.8) Max K Cable Entry L © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 60 with Strain Relief Type D - Direct Coupling - Standard Profile Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. When using Connector Designator B refer to pages 18 and 19 for part number development. TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 01 .639 (16.2) .940 (23.9) .750 (19.1) 02 .639 (16.2) .940 (23.9) .750 (19.1) 03 .664 (16.9) .970 (24.6) .810 (20.6) 04 .688 (17.5) .990 (25.1) .870 (22.1) 05 .732 (18.6) 1.040 (26.4) .980 (24.9) 06 .748 (19.0) 1.050 (26.7) 1.020 (25.9) 07 .773 (19.6) 1.070 (27.2) 1.080 (27.4) 08 .800 (20.3) 1.110 (28.2) 1.140 (29.0) 09 .823 (20.9) 1.140 (29.0) 1.200 (30.5) 10 1.041 (26.4) 1.310 (33.3) 1.480 (37.6) TABLE II: STANDARD FINISHES H Max 1.050 (26.7) 1.050 (26.7) 1.110 (28.2) 1.170 (29.7) 1.300 (33.0) 1.320 (33.5) 1.380 (35.1) 1.460 (37.1) 1.530 (38.9) 1.770 (45.0) GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options Dash No. 02 03 04 05 06 07 08 10 TABLE V: CABLE ENTRY Cable Range K Max Min Max .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .312 (7.9) .500 (12.7) 1.218 (30.9) .437 (11.1) .625 (15.9) 1.343 (34.1) .562 (14.3) .750 (19.1) 1.468 (37.3) .687 (17.4) .875 (22.2) 1.593 (40.5) .812 (20.6) 1.000 (25.4) 1.843 (46.8) 1.062 (27.0) 1.250 (31.8) Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE VI: CABLE ENTRY Cable Entry L Max Max .656 (16.7) .125 (3.2) .781 (19.8) .250 (6.4) .906 (23.0) .375 (9.5) .500 (12.7) 1.031 (26.2) 1.156 (29.4) .625 (15.9) 1.281 (32.5) .750 (19.1) 1.406 (35.7) .875 (22.2) 1.531 (38.9) 1.000 (25.4) 1.656 (42.1) 1.125 (28.6) 1.781 (45.2) 1.250 (31.8) Printed in U.S.A. © 2005 Glenair, Inc. CAGE Code 06324 www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 61 38 380-010 EMI/RFI Non-Environmental Backshell