380HS011NF16

380-011 EMI/RFI Non-Environmental Backshell with Strain Relief Type A - Rotatable Coupling - Standard Profile 38 CONNECTOR DESIGNATOR 380 G S 011 M 17 10 H 6 Product Series Connector Designator Strain Relief Style (H, A, M, D) Angle and Profile H = 45° J = 90° S = Straight Basic Part No. Cable Entry (Tables X, XI) Shell Size (Table I) Finish (Table II) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) G ROTATABLE COUPLING TYPE A OVERALL SHIELD TERMINATION Length ± .060 (1.52) Min. Order Length 2.5 Inch (See Note 4) A Thread (Table I) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) Length ± .060 (1.52) E (Table III) G (Table III) F (Table III) 1.25 (31.8) Max H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 16 with Strain Relief Type A - Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell E G F Size Max Max Max 11 1.240 (31.5) 1.050 (26.7) 1.380 (35.1) 13 1.260 (32.0) 1.070 (27.2) 1.440 (36.6) 15 1.290 (32.8) 1.100 (27.9) 1.500 (38.1) 17 1.310 (33.3) 1.120 (28.4) 1.570 (39.9) 19 1.340 (34.0) 1.150 (29.2) 1.630 (41.4) 23 1.380 (35.1) 1.190 (30.2) 1.730 (43.9) 25 1.410 (35.8) 1.220 (31.0) 1.800 (45.7) 29 1.580 (40.1) 1.390 (35.3) 2.040 (51.8) 33 1.620 (41.1) 1.430 (36.3) 2.130 (54.1) H Max 1.190 (30.2) 1.250 (31.8) 1.320 (33.5) 1.380 (35.1) 1.460 (37.1) 1.540 (39.1) 1.610 (40.9) 1.850 (47.0) 1.940 (49.3) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G & H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE X: CABLE ENTRY V Cable Range T Max Max Min Max .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) .350 (8.9) .625 (15.9) .780 (19.8) 1.332 (33.8) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .625 (15.9) .937 (23.8) .905 (23.0) 1.770 (45.0) 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) See Inside Back Cover for Additional Finish Options Now Available with the “NESTOR” Add “-445” to Specify Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. See Page 41 for Details. TABLE XI: CABLE ENTRY Dash W Z X Y Cable Range No. Max Max Max Max Max Min ** 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) * Not available in Style M clamp. ** Not Applicable Style D © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 17 38 380-011 EMI/RFI Non-Environmental Backshell