380LA019B18

380-019 EMI/RFI Non-Environmental Backshell with Strain Relief Type E - Direct Coupling - Low Profile 38 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 CONNECTOR DESIGNATORS * 380 F S 019 M 24 12 D A 6 Product Series Connector Designator Angle and Profile A = 90° B = 45° S = Straight Basic Part No. Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (H, A, M, D) Termination (Note 4) D = 2 Rings T = 3 Rings Cable Entry (Tables X, XI) Shell Size (Table I) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 3) DIRECT COUPLING TYPE E INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION A Thread (Table I) B (Table I) Finish (Table II) J (Table III) G (Table IV) J (Table III) E (Table IV) B (Table I) B (Table I) F (Table IV) H (Table IV) STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 92 with Strain Relief Type E - Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS E G Elbow F Max Max Size Max 03 .457 (11.6) 1.470 (37.3) .500 (12.7) 04 .457 (11.6) 1.470 (37.3) .500 (12.7) 06 .520 (13.2) 1.530 (38.9) .595 (15.1) 08 .582 (14.8) 1.590 (40.4) .610 (15.5) 10 .645 (16.4) 1.680 (42.7) .700 (17.8) 12 .738 (18.7) 1.790 (45.5) .885 (22.5) 16 .926 (23.5) 1.980 (50.3) .975 (24.8) 20 1.020 (25.9) 2.130 (54.1) 1.125 (28.6) H Max 1.480 (37.6) 1.480 (37.6) 1.600 (40.6) 1.620 (41.1) 1.690 (42.9) 1.950 (49.5) 2.060 (52.3) 2.060 (52.3) Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not for inspection criteria. 3. Consult factory for shorter lengths on straight backshells. 4. Designate Symbol T for 3 ring termination of individual and overall braid. Designate D for standard 2 ring TABLE X: CABLE ENTRY termination of individual or overall braid. V Cable Range Dash T 5. When using Connector Designator B refer Max No. Max Min Max to pages 18 and 19 for part number .957 (24.3) .125 (3.2) .312 (7.9) 04 .780 (19.8) development. 06 .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) 08 TABLE II: STANDARD FINISHES .350 (8.9) .625 (15.9) 10 .780 (19.8) 1.332 (33.8) GLENAIR .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) 12 SYMBOL FINISH B Cadmium Plate, Olive Drab .625 (15.9) .937 (23.8) 16 .905 (23.0) 1.770 (45.0) M Electroless Nickel 20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) NF Cadmium Plate, Olive Drab 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) Over Electroless Nickel 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 See Inside Back Cover for Additional Finish Options 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE XI: CABLE ENTRY Dash W Z X Y Cable Range No. Max Max Max Max Max Min ** 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) * Not available in Style M clamp. ** Not Applicable Style D © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 93 38 380-019 EMI/RFI Non-Environmental Backshell