380LA071NF18

380-071 EMI/RFI Non-Environmental Backshell with Strain Relief Type G - Rotatable Coupling - Low Profile 380 F S 071 M 16 08 A 6 Product Series Connector Designator Angle and Profile A = 90° B = 45° S = Straight Basic Part No. .500 (12.7) Max A Thread (Table I) .88 (22.4) Max C Typ. (Table I) G (Table III) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (H, A, M, D) Cable Entry (Table X, XI) Shell Size (Table I) Finish (Table II) Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) 38 A-F-H-L-S ROTATABLE COUPLING TYPE G INDIVIDUAL OR OVERALL SHIELD TERMINATION CONNECTOR DESIGNATORS (Table III) E STYLE 2 (45° & 90° See Note 1) F (Table III) H (Table III) STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Entry Cable Range V Cable Range Y Cable Range Y Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 124 with Strain Relief Type G - Rotatable Coupling - Low Profile TABLE III: ELBOW DIMENSIONS Shell Size F E G Conn. Desig. Max Max Max A-F-L-S H .510 (13.0) .457 (11.6) 3.460 (87.9) 08 09 .520 (13.2) 3.520 (89.4) .595 (15.1) 10 11 .582 (14.8) 3.580 (90.9) .610 (15.5) 12 13 .645 (16.4) 3.900 (99.1) .700 (17.8) 14 15 .885 (22.5) .738 (18.7) 4.010 (101.9) 16 17 .975 (24.8) .926 (23.5) 4.200 (106.7) 18 19 .926 (23.5) 4.200 (106.7) .975 (24.8) 20 21 22 23 1.020 (25.9) 4.350 (110.5) 1.125 (28.6) 24 25 1.020 (25.9) 4.350 (110.5) 1.125 (28.6) 1.145 (29.1) 4.400 (111.8) 1.225 (31.1) 28 1.207 (30.7) 4.500 (114.3) 1.575 (40.0) 32 1.238 (31.4) 4.590 (116.6) 1.775 (45.1) 36 TABLE II: STANDARD FINISHES H Max 3.460 (87.9) 3.590 (91.2) 3.610 (91.7) 3.910 (99.3) 4.000 (101.6) 4.170 (105.9) 4.170 (105.9) 4.280 (108.7) 4.280 (108.7) 4.450 (113.0) 4.700 (119.4) 4.700 (119.4) GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE X: CABLE ENTRY Cable Range V T Max Max Min Max .957 (24.3) .780 (19.8) .125 (3.2) .312 (7.9) .250 (6.4) .437 (11.1) .780 (19.8) 1.145 (29.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) .350 (8.9) .625 (15.9) .780 (19.8) 1.332 (33.8) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) .875 (22.2) 1.250 (31.8) 1.092 (27.7) 2.113 (53.7) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. Dash W X No. Max Max 03* .437 (11.1) .760 (19.3) 04* .437 (11.1) .760 (19.3) 06* .500 (12.7) .760 (19.3) 08 .563 (14.3) .760 (19.3) 10 .563 (14.3) .760 (19.3) 12 .563 (14.3) .760 (19.3) 16 .656 (16.7) 1.073 (27.3) 20 .656 (16.7) 1.323 (33.6) 24 .656 (16.7) 1.323 (33.6) 28 1.188 (30.2) 1.572 (39.9) 32* 1.187 (30.1) 1.572 (39.9) 40* 1.125 (28.6) 1.572 (39.9) * Not available in Style M clamp. © 2005 Glenair, Inc. TABLE XI: CABLE ENTRY Z Y Cable Range Max Max Max Min ** .630 (16.0) .156 (4.0) .250 (6.4) .843 (21.4) .755 (19.2) .188 (4.8) .312 (7.9) .906 (23.0) .942 (23.9) .281 (7.1) .438 (11.1) 1.093 (27.8) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) ** Not Applicable Style D CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 125 38 380-071 EMI/RFI Non-Environmental Backshell