380LH013NF14

380-013 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Standard Profile 38 CONNECTOR DESIGNATORS 380 F H 013 M 24 12 A Product Series Connector Designator Angle and Profile H = 45° J = 90° See page 38-70 for straight Strain Relief Style (H, A, M, D) Cable Entry (Table X, XI) Shell Size (Table I) Finish (Table II) Basic Part No. A-F-H-L-S ROTATABLE COUPLING TYPE D INDIVIDUAL OR OVERALL SHIELD TERMINATION A Thread (Table I) E (Table III) G (Table III) C Typ. (Table I) F (Table III) H (Table III) .88 (22.4) Max Now Available with the “NESTOR” STYLE 2 (See Note 1) Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. Add “-445” to Specify This AS85049 Style “N” Coupling Interface. STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 72 with Strain Relief Type D - Rotatable Coupling - Standard Profile TABLE III: ELBOW DIMENSIONS Shell Size E F G Conn. Desig. Max A-F-L-S H Max Max .639 (16.2) 09 08 .940 (23.9) .750 (19.1) .664 (16.9) 11 10 .970 (24.6) .810 (20.6) .688 (17.5) 13 12 .990 (25.1) .870 (22.1) .705 (17.9) 1.020 (25.9) 15 14 .920 (23.4) .732 (18.6) 1.040 (26.4) 17 16 .980 (24.9) .748 (19.0) 1.050 (26.7) 1.020 (25.9) 19 18 .773 (19.6) 1.070 (27.2) 1.080 (27.4) 21 20 .800 (20.3) 1.110 (28.2) 1.140 (29.0) 23 22 .823 (20.9) 1.140 (29.0) 1.200 (30.5) 25 24 1.041 (26.4) 1.310 (33.3) 1.480 (37.6) 28 1.092 (27.7) 1.350 (34.3) 1.610 (40.9) 32 1.138 (28.9) 1.400 (35.6) 1.720 (43.7) 36 H Max 1.050 (26.7) 1.110 (28.2) 1.170 (29.7) 1.240 (31.5) 1.300 (33.0) 1.320 (33.5) 1.380 (35.1) 1.460 (37.1) 1.530 (38.9) 1.770 (45.0) 1.860 (47.2) 1.970 (50.0) See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE X: CABLE ENTRY Cable Range V T Max Max Min Max .957 (24.3) .780 (19.8) .125 (3.2) .312 (7.9) .250 (6.4) .437 (11.1) .780 (19.8) 1.145 (29.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) .350 (8.9) .625 (15.9) .780 (19.8) 1.332 (33.8) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) .875 (22.2) 1.250 (31.8) 1.092 (27.7) 2.113 (53.7) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. TABLE XI: CABLE ENTRY Dash Z X Y W Cable Range No. Max Max Max Max Min ** Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) * Not available in Style M clamp. ** Not Applicable Style D © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 73 38 380-013 EMI/RFI Non-Environmental Backshell