380LH106NF18

380-106 EMI/RFI Non-Environmental Backshell Light-Duty with Strain Relief Type C - Self-Locking - Rotatable Coupling - Standard Profile 38 CONNECTOR DESIGNATORS 380 F H 106 M 16 05 L Product Series Connector Designator Angle and Profile H = 45 J = 90 See page 38-44 for straight Strain Relief Style (L, G) Cable Entry (Tables IV, V) Shell Size (Table I) Finish (Table II) Basic Part No. A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING TYPE C OVERALL SHIELD TERMINATION A Thread (Table I) E Typ. (Table I) F (Table III) H (Table III) G (Table III) Anti-Rotation Device (Typ.) J (Table III) 1.00 (25.4) Max STYLE 2 (See Note 1) STYLE L Light Duty (Table IV) .850 (21.6) Max STYLE G Light Duty (Table V) .072 (1.8) Max Cable Entry Cable Range K L © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 46 Light-Duty with Strain Relief Type C - Self-Locking - Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size G F H Conn. Desig. Max Max Max A-F-L-S H .795 (20.2) 1.100 (27.9) .906 (23.0) 08 09 .820 (20.8) 1.130 (28.7) .966 (24.5) 10 11 .844 (21.4) 1.150 (29.2) 1.026 (26.1) 12 13 .861 (21.9) 1.180 (30.0) 1.076 (27.3) 14 15 .888 (22.6) 1.200 (30.5) 1.136 (28.9) 16 17 .904 (23.0) 1.210 (30.7) 1.176 (29.9) 18 19 .929 (23.6) 1.230 (31.2) 1.236 (31.4) 20 21 .956 (24.3) 1.270 (32.3) 1.296 (32.9) 22 23 .979 (24.9) 1.300 (33.0) 1.356 (34.4) 24 25 1.197 (30.4) 1.470 (37.3) 1.636 (41.6) 28 1.294 (32.9) 1.560 (39.6) 1.876 (47.7) 36 1.340 (34.0) 1.600 (40.6) 1.986 (50.4) 40 J Max 1.210 (30.7) 1.270 (32.3) 1.330 (33.8) 1.400 (35.6) 1.460 (37.1) 1.480 (37.6) 1.540 (39.1) 1.620 (41.1) 1.690 (42.9) 1.930 (49.0) 2.130 (54.1) 2.240 (56.9) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE IV: CABLE ENTRY Cable Range K Max Min Max .781 (19.8) .062 (1.6) .125 (3.2) .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .250 (6.4) .500 (12.7) 1.218 (30.9) .375 (9.5) .625 (15.9) 1.343 (34.1) .500 (12.7) .750 (19.1) 1.468 (37.3) .625 (15.9) .875 (22.2) 1.593 (40.5) .625 (15.9) 1.000 (25.4) 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.843 (46.8) .875 (22.2) 1.250 (31.8) Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE V: CABLE ENTRY Cable Entry L Max Max .125 (3.2) .593 (15.1) .250 (6.4) .718 (18.2) .375 (9.5) .843 (21.4) .500 (12.7) .968 (24.6) .625 (15.9) 1.109 (28.2) .750 (19.1) 1.218 (30.9) .875 (22.2) 1.343 (34.1) 1.000 (25.4) 1.468 (37.3) 1.125 (28.6) 1.593 (40.5) 1.250 (31.8) 1.718 (43.6) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 47 38 380-106 EMI/RFI Non-Environmental Backshell