380SS009B14

380-009 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Low Profile 38 CONNECTOR DESIGNATORS 380 F S 009 M 16 05 F 6 Product Series Connector Designator Angle and Profile A = 90 B = 45 S = Straight Basic Part No. A Thread (Table I) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (F, G) Cable Entry (Table IV, V) Shell Size (Table I) Finish (Table II) Length – .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) A-F-H-L-S ROTATABLE COUPLING TYPE D INDIVIDUAL OR OVERALL SHIELD TERMINATION Length – .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) .88 (22.4) Max E (Table III) F (Table III) G (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE F Light Duty (Table IV) .416 (10.5) Max Cable Range STYLE G Light Duty (Table V) .072 (1.8) Max Cable Entry Now Available with the NESTOR J K Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. Add “-445” to Specify This AS85049 Style “N” Coupling Interface. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 50 with Strain Relief Type D - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) F Max 1.500 (38.1) 1.510 (38.4) 1.580 (40.1) 1.660 (42.2) 1.770 (45.0) 1.960 (49.8) 1.960 (49.8) 2.110 (53.6) 2.110 (53.6) 2.160 (54.9) 2.260 (57.4) 2.360 (59.9) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.445 (36.7) 1.565 (39.8) 1.585 (40.3) 1.655 (42.0) 1.725 (43.8) 1.915 (48.6) 1.915 (48.6) 2.025 (51.4) 2.025 (51.4) 2.195 (55.8) 2.445 (62.1) 2.445 (62.1) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options Dash No. 02 03 04 05 06 07 08 10 TABLE IV: CABLE ENTRY Cable Range J Max Max Min .250 (6.4) .968 (24.6) .125 (3.2) .375 (9.5) 1.046 (26.6) .250 (6.4) .500 (12.7) 1.156 (29.4) .312 (7.9) .625 (15.9) 1.218 (30.9) .437 (11.1) .750 (19.1) 1.343 (34.1) .562 (14.3) .875 (22.2) 1.468 (37.3) .687 (17.4) 1.000 (25.4) 1.593 (40.5) .812 (20.6) 1.250 (31.8) 1.843 (46.8) 1.062 (27.0) Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE V: CABLE ENTRY K Cable Entry Max Max .125 (3.2) .656 (16.7) .781 (19.8) .250 (6.4) .375 (9.5) .906 (23.0) 1.031 (26.2) .500 (12.7) 1.156 (29.4) .625 (15.9) .750 (19.1) 1.281 (32.5) 1.406 (35.7) .875 (22.2) 1.531 (38.9) 1.000 (25.4) 1.125 (28.6) 1.656 (42.1) 1.781 (45.2) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 38 - Page 51 38 380-009 EMI/RFI Non-Environmental Backshell