390AB006M28

390-006 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type B - Direct Coupling - Low Profile 39 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 CONNECTOR DESIGNATORS * 390 F S 006 M 16 10 A 6 Product Series Connector Designator Angle and Profile A = 90° B = 45° S = Straight Basic Part No. Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (H, A, M, D) Cable Entry (Tables X, XI) Shell Size (Table I) Finish (Table II) DIRECT COUPLING TYPE B INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) A Thread (Table I) B (Table I) Length * O-Rings 1.188 (30.2) Approx. * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) J G STYLE 2 (STRAIGHT See Note 1) J E (Table III) (Table IV) (Table III) (Table IV) B (Table I) F (Table IV) B (Table I) H (Table IV) STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 39 - Page 28 with Strain Relief Type B - Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180(30.0) 1.250(31.8) 1.180(30.0) 1.250(31.8) 1.180(30.0) 1.250(31.8) 1.735(44.1) 1.180(30.0) 1.250(31.8) 1.915(48.6) 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.610 (40.9) 1.560(39.6) 1.915(48.6) 1.610(40.9) 1.750(44.5) 1.915(48.6) 1.610(40.9) 1.750(44.5) 1.915(48.6) 1.610(40.9) 2.190(55.6) 1.915(48.6) TABLE IV: ELBOW DIMENSIONS F E G Dash Max Max Max No. 04 .630 (16.0) 2.601 (66.1) .636 (16.2) 06 .630 (16.0) 2.601 (66.1) .710 (18.0) 08 .692 (17.6) 2.661 (67.6) .731 (18.6) 10 .755 (19.2) 3.091 (78.5) .825 (21.0) 12 .848 (21.5) 3.201 (81.3) .988 (25.1) 16 1.036 (26.3) 3.391 (86.1) 1.087 (27.6) 20 1.130 (28.7) 3.604 (91.5) 1.325 (33.7) 24 1.255 (31.9) 3.637 (92.4) 1.337 (34.0) 28 1.317 (33.5) 3.737 (94.9) 1.827 (46.4) 32 1.348 (34.2) 3.877 (98.5) 2.027 (51.5) H Max 2.551 (64.8) 2.671 (67.8) 2.691 (68.4) 3.101 (78.8) 3.191 (81.1) 3.361 (85.4) 3.534 (89.8) 3.687 (93.6) 3.937 (100.0) 3.987 (101.3) Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE X: CABLE ENTRY V Cable Range T Max Max Min Max .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) .250 (6.4) .437 (11.1) .780 (19.8) 1.145 (29.1) .780 (19.8) 1.332 (33.8) .387 (9.8) .562 (14.3) .350 (8.9) .625 (15.9) .780 (19.8) 1.332 (33.8) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) .875 (22.2) 1.250 (31.8) 1.092 (27.7) 2.113 (53.7) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. TABLE XI: CABLE ENTRY Dash W Z X Y Cable Range No. Max Max Max Max Max Min ** 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 281.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.437 (36.5) 1.875 (47.6) * Not available in Style M clamp. ** Not Applicable Style D © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 39 - Page 29 39 390-006 Submersible EMI/RFI Cable Sealing Backshell