390AN055M20

390-055 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type F - Self-Locking Rotatable Coupling - Full Radius Profile 39 CONNECTOR DESIGNATORS 390 F S 055 M 16 10 M 6 Product Series Connector Designator Angle and Profile M = 45 N = 90 S = Straight Basic Part No. Finish (Table II) Length * O-Rings 1.281 (32.5) Ref. Typ. * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (H, A, M, D) Cable Entry (Tables X, XI) Shell Size (Table I) A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING TYPE F INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION Length ± .060 (1.52) Minimum Order Length 2.0 Inch A Thread (Table I) (See Note 4) E Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) 1.00 (25.4) Max F (Table III) Anti-Rotation Device G (Table III) H (Table III) J (Table III) STYLE 2 (45° & 90° See Note 1) STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 39 - Page 70 with Strain Relief Type F - Self-Locking Rotatable Coupling - Full Radius Profile TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 G Max .968 (24.6) 1.031 (26.2) 1.094 (27.8) 1.156 (29.4) 1.218 (30.9) 1.250 (31.8) 1.312 (33.3) 1.344 (34.1) 1.406 (35.7) 1.594 (40.5) F Max 1.095 (27.8) 1.145 (29.1) 1.195 (30.4) 1.245 (31.6) 1.300 (33.0) 1.350 (34.3) 1.400 (35.6) 1.455 (37.0) 1.505 (38.1) 1.594 (10.5) J Max 1.281 (32.5) 1.406 (35.7) 1.531 (38.9) 1.656 (42.1) 1.781 (45.2) 1.906 (48.4) 2.031 (51.6) 2.156 (54.8) 2.281 (57.9) 2.594 (65.9) H Max 1.287 (32.7) 1.411 (35.8) 1.537 (39.0) 1.761 (44.7) 1.787 (45.4) 1.911 (48.5) 2.037 (51.7) 2.161 (54.9) 2.287 (58.1) 2.594 (65.9) See inside back cover fold-out or pages 13 and 14 for Tables I and II. Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE X: CABLE ENTRY Cable Range V T Max Min Max Max .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) .250 (6.4) .437 (11.1) .780 (19.8) 1.145 (29.1) .387 (9.3) .562 (14.3) .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .780 (19.8) 1.332 (33.8) .500 (12.7) .750 (19.1) .811 (20.6) 1.551 (39.4) .625 (15.9) .937 (23.8) .905 (23.0) 1.770 (45.0) .875 (22.2) 1.250 (31.8) 1.092 (27.7) 2.113 (53.7) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Interface O-Ring not supplied with connector designator A. Dash X W No. Max Max 03* .437 (11.1) .760 (19.3) 04* .437 (11.1) .760 (19.3) 06* .500 (12.7) .760 (19.3) 08 .563 (14.3) .760 (19.3) 10 .563 (14.3) .760 (19.3) 12 .563 (14.3) .760 (19.3) 16 .656 (16.7) 1.073 (27.3) 20 .656 (16.7) 1.323 (33.6) 24 .656 (16.7) 1.323 (33.6) 28 1.188 (30.2) 1.572 (39.9) 32* 1.187 (30.1) 1.572 (39.9) 40* 1.125 (28.6) 1.572 (39.9) * Not available in Style M clamp. © 2005 Glenair, Inc. TABLE XI: CABLE ENTRY Y Z Max Max .843 (21.4) .630 (16.0) .906 (23.0) .755 (19.2) 1.093 (27.8) .942 (23.9) 1.187 (30.1) 1.067 (27.1) 1.281 (32.5) 1.192 (30.3) 1.500 (38.1) 1.380 (35.1) 1.719 (43.7) 1.535 (39.0) 2.062 (52.4) 1.848 (46.9) 2.312 (58.7) 2.255 (57.3) 2.719 (69.1) 2.505 (63.6) 2.969 (75.4) 2.755 (70.0) 3.531 (89.7) 3.255 (82.7) Cable Range Min ** Max .156 (4.0) .250 (6.4) .188 (4.8) .312 (7.9) .281 (7.1) .438 (11.1) .387 (9.3) .562 (14.3) .375 (9.5) .625 (15.9) .438 (11.1) .750 (19.1) .625 (15.9) .938 (23.8) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) 1.875 (47.6) 2.375 (60.3) ** Not Applicable Style D Printed in U.S.A. CAGE Code 06324 www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 39 - Page 71 39 390-055 Submersible EMI/RFI Cable Sealing Backshell