390FA010M24

390-010 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type C - Direct Coupling - Low Profile 39 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 6 CONNECTOR DESIGNATORS * 390 F S 010 M 16 10 E 6 Product Series Connector Designator Angle and Profile A = 90 B = 45 S = Straight Basic Part No. Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (C, E) Cable Entry (Tables X, XI) Shell Size (Table I) Finish (Table II) DIRECT COUPLING TYPE C OVERALL SHIELD TERMINATION Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) Length * A Thread (Table I) B (Table I) O-Rings .937 (23.8) Approx * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) J (Table III) G (Table IV) STYLE 2 (STRAIGHT See Note 1) J (Table III) E (Table IV) B (Table I) F (Table IV) B (Table I) H (Table IV) T STYLE C Medium Duty (Table X) Clamping Bars STYLE E Medium Duty (Table XI) X (See Note 5) Y Cable Range W Cable Range Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 39 - Page 36 with Strain Relief Type C - Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS Elbow E G F Size Max Max Max 04 .630 (16.0) 2.715 (69.0) .636 (16.2) 06 .630 (16.0) 2.775 (70.5) .710 (18.0) 08 .692 (17.6) 2.835 (72.0) .731 (18.6) 10 .755 (19.2) 3.554 (90.3) .825 (21.0) 12 .848 (21.5) 3.664 (93.1) .988 (25.1) 16 1.036 (26.3) 3.854 (97.9) 1.087 (27.6) 20 1.130 (28.7) 4.192 (106.5) 1.325 (33.7) 24 1.255 (31.9) 4.225 (107.3) 1.337 (34.0) 28 1.317 (33.5) 4.325 (109.9) 1.827 (46.4) 32 1.348 (34.2) 4.465 (113.4) 2.027 (51.5) H Max 2.725 (69.2) 2.845 (72.3) 2.865 (72.8) 3.564 (90.5) 3.654 (92.8) 3.824 (97.1) 4.122 (104.7) 4.275 (108.6) 4.525 (114.9) 4.575 (116.2) Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 Dash No. 03 04 06 08 10 12 16 20 24 28 32 T Max 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.281 (32.5) 1.281 (32.5) 1.406 (35.7) 1.656 (42.1) 1.906 (48.4) 1.906 (48.4) 2.000 (50.8) TABLE X: CABLE ENTRY Cable Range W X Max Max Min Ref .812 (20.6) .219 (5.6) .156 (4.0) .135 (3.4) .937 (23.8) .312 (7.9) .188 (4.8) .203 (5.2) 1.062 (27.0) .438 (11.1) .281 (7.1) .285 (7.2) 1.188 (30.2) .531 (13.5) .312 (7.9) .350 (8.9) 1.312 (33.3) .625 (15.9) .375 (9.5) .390 (9.9) 1.562 (39.7) .750 (19.1) .500 (12.7) .460 (11.7) 1.750 (44.5) .938 (23.8) .625 (15.9) .510 (13.0) 2.250 (57.2) 1.250 (31.8) .938 (23.8) .695 (17.7) 2.375 (60.3) 1.375 (34.9) 1.000 (25.4) .715 (18.2) 2.625 (66.7) 1.625 (41.3) 1.250 (31.8) .915 (23.2) 2.812 (71.4) 1.875 (47.6) 1.500 (38.1) 1.070 (27.2) 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Saddles are bottomed on Clamp Ears. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. Printed in U.S.A. Dash No. 03 04 06 08 10 12 16 20 24 28 32 Y Max .739 (18.8) .739 (18.8) .739 (18.8) .739 (18.8) .791 (20.1) .880 (22.4) .901 (22.9) 1.031 (26.2) 1.250 (31.8) 1.250 (31.8) 1.312 (33.3) TABLE XI: CABLE ENTRY Cable Range Z Max Max Min .219 (5.6) .812 (20.6) .156 (4.0) .312 (7.9) .937 (23.8) .188 (4.8) .438 (11.1) 1.062 (27.0) .281 (7.1) .531 (13.5) 1.188 (30.2) .312 (7.9) .625 (15.9) 1.312 (33.3) .375 (9.5) .750 (19.1) 1.562 (39.7) .500 (12.7) .938 (23.8) 1.750 (44.5) .625 (15.9) 1.250 (31.8) 2.250 (57.2) .938 (23.8) 1.375 (34.9) 2.375 (60.3) 1.000 (25.4) 1.625 (41.3) 2.625 (66.7) 1.250 (31.8) 1.875 (47.6) 2.812 (71.4) 1.500 (38.1) © 2005 Glenair, Inc. CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 39 - Page 37 39 390-010 Submersible EMI/RFI Cable Sealing Backshell