390FS001M18

390-001 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type A - Rotatable Coupling - Low Profile 39 CONNECTOR DESIGNATORS 390 F S 001 M 16 10 M 6 Product Series Connector Designator Angle and Profile A = 90° B = 45° S = Straight Basic Part No. A Thread (Table I) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (H, A, M, D) Cable Entry (Tables X, XI) Shell Size (Table I) Finish (Table II) 1.125 (28.6) Approx. * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) G (Table III) A-F-H-L-S ROTATABLE COUPLING TYPE A OVERALL SHIELD TERMINATION Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) Length * O-Rings C Typ. (Table I) E (Table III) STYLE 2 (STRAIGHT See Note 1) .88 (22.4) Max F (Table III) H (Table III) Now Available with the “NESTOR” STYLE 2 (45° & 90° See Note 1) Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. Add “-445” to Specify This AS85049 Style “N” Coupling Interface. STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 39 - Page 12 with Strain Relief Type A - Rotatable Coupling - Low Profile TABLE III: ELBOW DIMENSIONS Shell Size E F G Conn. Desig. A-F-L-S H Max Max Max 08 09 .457 (11.6) 1.760 (44.7) .500 (12.7) 10 11 .520 (13.2) 1.920 (48.8) .595 (15.1) 12 13 .582 (14.8) 1.990 (50.5) .610 (15.5) 14 15 .645 (16.4) 2.144 (54.5) .700 (17.8) 16 17 .738 (18.7) 2.254 (57.3) .885 (22.5) 18 19 .926 (23.5) 2.444 (62.1) .975 (24.8) 20 21 .926 (23.5) 2.444 (62.1) .975 (24.8) 22 23 1.020 (25.9) 2.657 (67.5) 1.125 (28.6) 24 25 1.020 (25.9) 2.657 (67.5) 1.125 (28.6) 28 1.145 (29.1) 2.690 (68.3) 1.225 (31.1) 32 1.207 (30.7) 2.790 (70.9) 1.575 (40.0) 36 1.238 (31.4) 2.930 (74.4) 1.775 (45.1) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Interface O-Ring not supplied with connector designator A. H Max 1.880 (47.8) 1.990 (50.5) 2.020 (51.3) 2.154 (54.7) 2.244 (57.0) 2.414 (61.3) 2.414 (61.3) 2.587 (65.7) 2.587 (65.7) 2.740 (69.6) 2.990 (75.9) 3.040 (77.2) Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE X: CABLE ENTRY T V Cable Range Max Max Min Max .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) .780 (19.8) 1.332 (33.8) .387 (9.8) .562 (14.3) .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE XI: CABLE ENTRY Dash W X Y Z No. Max Max Max Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) * Not available in Style M clamp. © 2005 Glenair, Inc. CAGE Code 06324 Cable Range Min ** Max .156 (4.0) .250 (6.4) .188 (4.8) .312 (7.9) .281 (7.1) .438 (11.1) .387 (9.8) .562 (14.3) .375 (9.5) .625 (15.9) .438 (11.1) .750 (19.1) .625 (15.9) .938 (23.8) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) 1.875 (47.6) 2.375 (60.3) ** Not Applicable Style D Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 39 - Page 13 39 390-001 Submersible EMI/RFI Cable Sealing Backshell