390LL011M10

390-011 Splash-Proof EMI/RFI Cable Sealing Backshell Light-Duty with Strain Relief Type C - Rotatable Coupling - Standard Profile 39 CONNECTOR DESIGNATORS 390 F K 011 M 16 05 L Product Series Connector Designator Angle and Profile K = 45 L = 90 See 39-38 for straight Strain Relief Style (L, G) Cable Entry (Table IV) Shell Size (Table I) Finish (Table II) Basic Part No. A-F-H-L-S ROTATABLE COUPLING TYPE C OVERALL SHIELD TERMINATION .88 (22.4) Max A Thread (Table I) E (Table III) G (Table III) C Typ. (Table I) F (Table III) STYLE 2 (45° & 90° See Note 1) H (Table III) STYLE L Light Duty (Table IV) .850 (21.6) Max STYLE G Light Duty (Table IV) .072 (1.8) Max Now Available with the NESTOR Cable Range K Cable Range L Add “-445” to Specify Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. See Page 41 for Details. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 39 - Page 40 Light-Duty with Strain Relief Type C - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 E ±.062 .398 .458 .518 .588 .678 .868 .868 .958 .958 1.041 1.092 1.138 ±(1.6) (10.1) (11.6) (13.2) (14.9) (17.2) (22.0) (22.0) (24.3) (24.3) (26.4) (27.7) (28.9) ±.062 2.210 2.270 2.330 2.420 2.530 2.720 2.720 2.870 2.870 3.020 3.270 3.500 F ±(1.6) (56.1) (57.7) (59.2) (61.5) (64.3) (69.1) (69.1) (72.9) (72.9) (76.7) (83.1) (88.9) ±.062 .438 .533 .548 .638 .823 .913 .913 1.063 1.063 1.230 1.610 1.720 G ±(1.6) (11.1) (13.5) (13.9) (16.2) (20.9) (23.2) (23.2) (27.0) (27.0) (31.2) (40.9) (43.7) H ±.062 2.080 2.120 2.090 2.090 2.130 2.250 2.180 2.240 2.170 2.320 2.570 2.800 ±(1.6) (52.8) (53.8) (53.1) (53.1) (54.1) (57.2) (55.4) (56.9) (55.1) (58.9) (65.3) (71.1) Dash No. 01 02 03 04 05 06 07 08 09 10 K Max .781 (19.8) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) TABLE IV: CABLE ENTRY Cable L Min Max .062 (1.6) .593 (15.1) .125 (3.2) .718 (18.2) .250 (6.4) .843 (21.4) .375 (9.5) .968 (24.6) .500 (12.7) 1.109 (28.2) .625 (15.9) 1.218 (30.9) .750 (19.1) 1.343 (34.1) .875 (22.2) 1.468 (37.3) 1.593 (40.5) 1.000 (25.4) 1.718 (43.6) 1.125 (28.6) Range Max .125 (3.2) .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Interface O-Ring not supplied with Connector Designator A. 6. -445 modification not available on MIL-DTL-38999 Series II. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 39 - Page 41 39 390-011 Splash-Proof EMI/RFI Cable Sealing Backshell