390SA011M32

390-011 Splash-Proof EMI/RFI Cable Sealing Backshell Light-Duty with Strain Relief Type C - Rotatable Coupling - Low Profile 390 F S 011 M 16 05 L 6 39 CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile A = 90 B = 45 S = Straight Basic Part No. Length * A Thread (Table I) A-F-H-L-S ROTATABLE COUPLING TYPE C OVERALL SHIELD TERMINATION Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (L, G) Cable Entry (Table IV) Shell Size (Table I) Finish (Table II) .312 (7.9) Max * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) G (Table III) O-Rings C Typ. (Table I) E STYLE 2 (STRAIGHT See Note 1) .88 (22.4) Max (Table III) F (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) Now Available with the NESTOR Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. Add “-445” to Specify This AS85049 Style “N” Coupling Interface. STYLE L Light Duty (Table IV) .850 (21.6) Max STYLE G Light Duty (Table IV) .072 (1.8) Max Cable Range Cable Range K L © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 39 - Page 38 Light-Duty with Strain Relief Type C - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 E Max .520 .582 .645 .738 .926 .926 1.020 1.020 1.145 1.207 1.238 (13.2) (14.8) (16.4) (18.7) (23.5) (23.5) (25.9) (25.9) (29.1) (30.7) (31.4) F Max 1.748 1.808 1.898 2.008 2.198 2.198 2.348 2.348 2.398 2.498 2.588 (44.4) (45.9) (48.2) (51.0) (55.8) (55.8) (59.6) (59.6) (60.9) (63.4) (65.7) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.698 (43.1) 1.818 (46.2) 1.838 (46.7) 1.908 (48.5) 1.998 (50.7) 2.168 (55.1) 2.168 (55.1) 2.278 (57.9) 2.278 (57.9) 2.448 (62.2) 2.698 (68.5) 2.698 (68.5) Dash No. 01 02 03 04 05 06 07 08 09 10 K Max .781 (19.8) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) TABLE IV: CABLE ENTRY Cable L Min Max .062 (1.6) .593 (15.1) .125 (3.2) .718 (18.2) .250 (6.4) .843 (21.4) .375 (9.5) .968 (24.6) .500 (12.7) 1.109 (28.2) .625 (15.9) 1.218 (30.9) .750 (19.1) 1.343 (34.1) .875 (22.2) 1.468 (37.3) 1.593 (40.5) 1.000 (25.4) 1.718 (43.6) 1.125 (28.6) Range Max .125 (3.2) .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Interface O-Ring not supplied with Connector Designator A. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 39 - Page 39 39 390-011 Splash-Proof EMI/RFI Cable Sealing Backshell