390SA053M24

390-053 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type F - Rotatable Coupling - Low Profile 39 CONNECTOR DESIGNATORS 390 F S 053 M 16 10 M 6 Product Series Connector Designator Angle and Profile A = 90 B = 45 S = Straight Basic Part No. Finish (Table II) Length * A Thread (Table I) O-Rings 1.281 (32.5) Ref. Typ. * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (H, A, M, D) Cable Entry (Tables X, XI) Shell Size (Table I) A-F-H-L-S ROTATABLE COUPLING TYPE F INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) E (Table III) STYLE 2 (STRAIGHT See Note 1) .88 (22.4) Max C Typ. (Table I) G F (Table III) (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) Add “-445” to Specify Glenair’s Non-Detent, ("NESTOR") Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 39 - Page 60 with Strain Relief Type F - Rotatable Coupling - Low Profile TABLE III: ELBOW DIMENSIONS E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) F G Max Max 1.760 (44.7) .500 (12.7) 1.920 (48.8) .595 (15.1) 1.990 (50.5) .610 (15.5) 2.144 (54.5) .700 (17.8) 2.254 (57.3) .885 (22.5) 2.444 (62.1) .975 (24.8) 2.444 (62.1) .975 (24.8) 2.657 (67.5) 1.125 (28.6) 2.657 (67.5) 1.125 (28.6) 2.690 (68.3) 1.225 (31.1) Shell Size Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 H Max 1.880 (47.8) 1.990 (50.5) 2.020 (51.3) 2.154 (54.7) 2.244 (57.0) 2.414 (61.3) 2.414 (61.3) 2.587 (65.7) 2.587 (65.7) 2.740 (69.6) See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE X: CABLE ENTRY Dash T V Cable Range No. Max Max Min Max 04 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) 06 .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) 08 .780 (19.8) 1.332 (33.8) .387 (9.3) .562 (14.3) 10 .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) 16 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Interface O-Ring not supplied with connector designator A. TABLE XI: CABLE ENTRY Dash W X Y Z No. Max Max Max Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) * Not available in Style M clamp. Cable Range Min ** Max .156 (4.0) .250 (6.4) .188 (4.8) .312 (7.9) .281 (7.1) .438 (11.1) .387 (9.3) .562 (14.3) .375 (9.5) .625 (15.9) .438 (11.1) .750 (19.1) .625 (15.9) .938 (23.8) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) 1.875 (47.6) 2.375 (60.3) ** Not Applicable Style D © 2007 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 39 - Page 61 39 390-053 Submersible EMI/RFI Cable Sealing Backshell