390SS012M28

390-012 Splash-Proof EMI/RFI Cable Sealing Backshell Light-Duty with Strain Relief Type C - Direct Coupling - Low Profile 39 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 CONNECTOR DESIGNATORS * 390 F S 012 M 16 05 L 6 Product Series Connector Designator Angle and Profile A = 90 B = 45 S = Straight Basic Part No. * Length A (Table I) O-Rings Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (L, G) Cable Entry (Table V) Shell Size (Table I) Finish (Table II) .312 (7.9) Max * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) DIRECT COUPLING TYPE C OVERALL SHIELD TERMINATION Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) B (Table I) STYLE 2 (STRAIGHT See Note 1) J E IV) J G (Table III) (Table (Table III) (Table IV) F (Table IV) H (Table IV) STYLE L Light Duty (Table V) .850 (21.6) Max STYLE G Light Duty (Table V) .072 (1.8) Max Cable Range Cable Range K L © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 39 - Page 42 Light-Duty with Strain Relief Type C - Direct Coupling - Low Profile Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) See inside back cover fold-out or pages 13 and 14 for Tables I and II. 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. Elbow Size 01 02 03 04 05 06 07 08 09 10 E Max .457 (11.6) .457 (11.6) .630 (16.0) .692 (17.6) .755 (19.2) .848 (21.5) 1.036 (26.3) 1.130 (28.7) 1.130 (28.7) 1.130 (28.7) TABLE IV: CABLE ENTRY F G Max Max 1.700 (43.2) .636 (16.2) 1.700 (43.2) .636 (16.2) 1.748 (44.4) .709 (18.0) 1.808 (45.9) .734 (18.6) 1.898 (48.2) .825 (21.0) 1.998 (50.7) .990 (25.1) 2.198 (55.8) 1.090 (27.7) 2.338 (59.4) 1.325 (33.7) 2.338 (59.4) 1.325 (33.7) 2.338 (59.4) 1.325 (33.7) H Max 1.698 (43.1) 1.698 (43.1) 1.818 (46.2) 1.838 (46.7) 1.908 (48.5) 1.998 (50.7) 2.168 (55.1) 2.278 (57.9) 2.278 (57.9) 2.278 (57.9) Dash No. 01 02 03 04 05 06 07 08 09 10 K Max .781 (19.8) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) TABLE V: CABLE ENTRY Cable L Min Max .062 (1.6) .593 (15.1) .125 (3.2) .718 (18.2) .250 (6.4) .843 (21.4) .375 (9.5) .968 (24.6) .500 (12.7) 1.109 (28.2) .625 (15.9) 1.218 (30.9) .750 (19.1) 1.343 (34.1) .875 (22.2) 1.468 (37.3) 1.593 (40.5) 1.000 (25.4) 1.718 (43.6) 1.125 (28.6) Range Max .125 (3.2) .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 39 - Page 43 39 390-012 Splash-Proof EMI/RFI Cable Sealing Backshell