400LD015M10

400-015 TAG Ring Backshell ® 40 CONNECTOR DESIGNATORS with Strain Relief Self-Locking Rotatable Coupling - Split Shell 400 F D 015 M 16 06 L Product Series Connector Designator Angle and Profile C = Ultra-Low Split 90 D = Split 90 F = Split 45 H (Table III) Strain Relief Style (F, G, L) Cable Entry (Table IV, V) Shell Size (Table I) Finish (Table II) Basic Part No. M (Table III) K (Table III) A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING A Thread (Table I) F (Table III) G (Table III) E Typ. (Table I) Ground Spring AntiRotation Device (Typ.) Split 45° Cable Entry J (Table Max III) Wire Bundle (Table III, Note 1) L (Table III) N (Table IV) P (Table V) 1.00 (25.4) Max Split 90° Ultra LowProfile Split 90° STYLE L Light Duty (Table V) .850 (21.6) Approx. STYLE 2 (See Note 1) STYLE F Light Duty (Table V) .416 (10.5) Approx. Cable Range STYLE G Light Duty (Table IV) .072 (1.8) Approx. Cable Entry P N Cable Range P © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 20 with Strain Relief Self-Locking Rotatable Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: DIMENSIONS Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 F Max .596 (15.1) .656 (16.7) .716 (18.2) .776 (19.7) .836 (21.2) .906 (23.0) .976 (24.8) 1.036 (26.3) 1.096 (27.8) G Max 1.500 (38.1) 1.560 (39.6) 1.630 (41.4) 1.660 (42.2) 1.760 (44.7) 1.820 (46.2) 1.880 (47.8) 1.940 (49.3) 2.000 (50.8) H Max .836 (21.2) .906 (23.0) .966 (24.5) 1.026 (26.1) 1.086 (27.6) 1.156 (29.4) 1.216 (30.9) 1.276 (32.4) 1.336 (33.9) J Max 1.440 (36.6) 1.500 (38.1) 1.570 (39.9) 1.600 (40.6) 1.700 (43.2) 1.760 (44.7) 1.820 (46.2) 1.880 (47.8) 1.940 (49.3) K Ref .496 (12.6) .426 (10.8) .426 (10.8) .436 (11.1) .576 (14.6) .796 (20.2) .796 (20.2) .696 (17.7) .696 (17.7) L Max 2.060 (52.3) 2.220 (56.4) 2.220 (56.4) 2.290 (58.2) 2.340 (59.4) 2.370 (60.2) 2.370 (60.2) 2.520 (64.0) 2.520 (64.0) M Max .837 (21.3) .887 (22.5) .887 (22.5) .987 (25.1) 1.137 (28.9) 1.337 (34.0) 1.337 (34.0) 1.337 (34.0) 1.337 (34.0) Function C Max Wire Bundle .250 (6.4) .375 (9.5) .375 (9.5) .500 (12.7) .625 (15.9) .625 (15.9) .625 (15.9) .750 (19.1) .750 (19.1) Dash No. 02 03 04 05 06 07 08 09 10 TABLE IV: CABLE ENTRY N Cable Entry Max Max .545 (13.8) .250 (6.4) .670 (17.0) .375 (9.5) .795 (20.2) .500 (12.7) .920 (23.4) .625 (15.9) 1.045 (26.5) .750 (19.1) 1.170 (29.7) .875 (22.2) 1.295 (32.9) 1.000 (25.4) 1.420 (36.1) 1.125 (28.6) 1.670 (42.4) 1.250 (31.8) Dash No. 02 03 04 05 06 07 08 09 10 TABLE V: CABLE ENTRY P Cable Max Min .968 (24.6) .125 (3.2) 1.046 (26.6) .250 (6.4) 1.156 (29.4) .250 (6.4) 1.218 (30.9) .375 (9.5) 1.343 (34.1) .500 (12.7) 1.468 (37.3) .625 (15.9) 1.593 (40.5) .625 (15.9) 1.718 (43.6) .750 (19.1) 1.843 (46.8) .875 (22.2) Range Max .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied (not available in Function C). Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Angular function "C", low-profile split elbow, not available with "S" connector designator. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 21 40 400-015 TAG Ring Backshell ®