400SA001M14

400-001 TAG Ring Backshell ® 40 CONNECTOR DESIGNATORS with Strain Relief Rotatable Coupling - Low Profile 400 F S 001 M 16 06 L 6 Product Series Connector Designator Angle and Profile A = 90 B = 45 S = Straight Basic Part No. Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) A Thread (Table I) Length * Ground Spring * Length ± .060 (1.52) Minimum Order Length 1.0 Inch (See Note 4) Shown with Style G Nut STYLE 2 (STRAIGHT See Note 1) E .88 (22.4) Max (Table III) A-F-H-L-S ROTATABLE COUPLING Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (F, G, L) Cable Entry (Table IV, V) Shell Size (Table I) Finish (Table II) C Typ. (Table I) Add “-445” to Specify Glenair’s Non-Detent, ("NESTOR") Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. G (Table III) F (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE F Light Duty (Table V) .416 (10.5) Approx. Cable Range Shown with Style L Strain Relief STYLE G Light Duty (Table IV) .072 (1.8) Approx. Cable Entry STYLE L Light Duty (Table V) .850 (21.6) Approx. L K Cable Range L © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 4 with Strain Relief Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) F Max 1.660 (42.2) 1.720 (43.7) 1.780 (45.2) 1.870 (47.5) 1.980 (50.3) 2.170 (55.1) 2.170 (55.1) 2.320 (58.9) 2.320 (58.9) 2.370 (60.2) 2.470 (62.7) 2.560 (65.0) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.670 (42.4) 1.790 (45.5) 1.810 (46.0) 1.880 (47.8) 1.970 (50.0) 2.140 (54.4) 2.140 (54.4) 2.250 (57.2) 2.250 (57.2) 2.420 (61.5) 2.670 (67.8) 2.670 (67.8) Dash No. 02 03 04 05 06 07 08 09 10 TABLE IV: CABLE ENTRY K Cable Entry Max Max .545 (13.8) .250 (6.4) .670 (17.0) .375 (9.5) .795 (20.2) .500 (12.7) .920 (23.4) .625 (15.9) 1.045 (26.5) .750 (19.1) 1.170 (29.7) .875 (22.2) 1.295 (32.9) 1.000 (25.4) 1.420 (36.1) 1.125 (28.6) 1.670 (42.4) 1.250 (31.8) Dash No. 02 03 04 05 06 07 08 09 10 TABLE V: CABLE ENTRY Cable L Min Max .125 (3.2) .968 (24.6) .250 (6.4) 1.046 (26.6) .250 (6.4) 1.156 (29.4) .375 (9.5) 1.218 (30.9) .500 (12.7) 1.343 (34.1) .625 (15.9) 1.468 (37.3) .625 (15.9) 1.593 (40.5) .750 (19.1) 1.718 (43.6) .875 (22.2) 1.843 (46.8) Range Max .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 5 40 400-001 TAG Ring Backshell ®