420SS002M08

420-002 Sealtite™/Liquidtite Conduit Backshell Direct Coupling - Low Profile 420 F S 002 M 16 03-6 42 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 6 CONNECTOR DESIGNATORS * Product Series Connector Designator Angle and Profile A = 90 B = 45 S = Straight Basic Part No. Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Cable Entry (Table V) Shell Size (Table I) Finish (Table II) DIRECT COUPLING Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) A Thread (Table I) Length * O-Ring Sealtite/Liquidtite Conduit or Equivalent (Customer Furnished) B (Table I) STYLE 2 (STRAIGHT) K ** L ** M ** * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) E N Wrench Flat (Table V) ** (Table V) J (Table III) (Table IV) J G (Table III) (Table IV) B (Table I) F (Table IV) B (Table I) H (Table IV) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 42 - Page 4 Direct Coupling - Low Profile Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) See inside back cover fold-out or pages 13 and 14 for Tables I and II. 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Sealtite is a trademark of Anaconda Corp. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. Elbow Size 01 02 03 04 05 06 07 TABLE IV: ELBOW DIMENSIONS E F G Max Max Max .630 (16.0) 1.870 (47.5) .709 (18.0) .692 (17.6) 1.930 (49.0) .734 (18.6) .848 (21.5) 2.130 (54.1) .990 (25.1) 1.036 (26.3) 2.320 (58.9) 1.090 (27.7) 1.130 (28.7) 2.470 (62.7) 1.325 (33.7) 1.317 (33.5) 2.620 (66.5) 1.827 (46.4) 1.348 (34.2) 2.710 (68.8) 2.027 (51.5) H Max 1.940 (49.3) 1.960 (49.8) 2.120 (53.8) 2.290 (58.2) 2.400 (61.0) 2.820 (71.6) 2.820 (71.6) Dash Conduit No. Size (Ref.) 01 3/8 02 1/2 03 3/4 04 1 05 1 1/4 06 1 1/2 07 2 TABLE V: CABLE ENTRY L Dimension K Dimension Min Max Max Min .484 (12.3) .710 (18.0) .504 (12.8) .690 (17.5) .622 (15.8) .840 (21.3) .642 (16.3) .820 (20.8) .820 (20.8) .840 (21.3) 1.030 (26.2) 1.050 (26.7) 1.041 (26.4) 1.066 (27.1) 1.290 (32.8) 1.315 (33.4) 1.380 (35.1) 1.410 (35.8) 1.630 (41.4) 1.660 (42.2) 1.575 (40.0) 1.600 (40.6) 1.875 (47.6) 1.900 (48.3) 2.020 (51.3) 2.045 (51.9) 2.350 (59.7) 2.375 (60.3) M Max 1.155 (29.3) 1.282 (32.6) 1.531 (38.9) 1.781 (45.2) 2.218 (56.3) 2.468 (62.7) 3.031 (77.0) N Max Wrench Flat 1.000 (25.4) 1.125 (28.6) 1.375 (34.9) 1.625 (41.3) 2.062 (52.4) 2.312 (58.7) 2.875 (73.0) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 42 - Page 5 42 420-002 Sealtite™/Liquidtite Conduit Backshell