440AF070M08

440-070 EMI/RFI Dual Banding Adapter Rotatable Coupling - Split Shell 440 A D 070 NF 16 12 K P 440 CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile C = Ultra-Low Split 90 D = Split 90 F = Split 45 Basic Part No. Polysulfide (Omit for none) B = 2 Bands K = 2 Precoiled Bands (Omit for none) Dash No. (Table IV) Shell Size (Table I) Finish (Table II) A-F-H-L-S ROTATABLE COUPLING A Thread (Table I) D (Table III) F (Table III) C Typ. (Table I) E (Table III) Split 45° Termination Areas Free of Cadmium. Knurl or Ridges Mfr's Option Split 90° .380 (9.7) Typ. G (Table III) L* M* .060 (1.5) Typ. N* * (Table IV) K (Table III) H (Table III) Polysulfide Stripes P Option .88 (22.4) Max Max Wire Bundle (Table III, Note 1) Band Option (K Option Shown See Note 3) STYLE 2 (See Note 1) J (Table III) Ultra LowProfile Split 90° Printed in U.S.A. © 2005 Glenair, Inc. CAGE Code 06324 www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 32 Rotatable Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 D Max .440 (11.2) .500 (12.7) .560 (14.2) .620 (15.7) .680 (17.3) .750 (19.1) .820 (20.8) .880 (22.4) .940 (23.9) E Max 1.940 (49.3) 2.000 (50.8) 2.070 (52.6) 2.100 (53.3) 2.200 (55.9) 2.260 (57.4) 2.320 (58.9) 2.380 (60.5) 2.440 (62.0) F Max .680 (17.3) .750 (19.1) .810 (20.6) .870 (22.1) .930 (23.6) 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) G Max 1.880 (47.8) 1.940 (49.3) 2.010 (51.1) 2.040 (51.8) 2.140 (54.4) 2.200 (55.9) 2.260 (57.4) 2.320 (58.9) 2.380 (60.5) H Ref .340 (8.6) .270 (6.9) .270 (6.9) .280 (7.1) .420 (10.7) .640 (16.3) .640 (16.3) .540 (13.7) .540 (13.7) J Max 2.220 (56.4) 2.380 (60.5) 2.380 (60.5) 2.450 (62.2) 2.500 (63.5) 2.530 (64.3) 2.530 (64.3) 2.680 (68.1) 2.680 (68.1) K Function C Max Max Wire Bundle .681 (17.3) .250 (6.4) .731 (18.6) .375 (9.5) .731 (18.6) .375 (9.5) .831 (21.1) .500 (12.7) .981 (24.9) .625 (15.9) 1.181 (30.0) .625 (15.9) 1.181 (30.0) .625 (15.9) 1.181 (30.0) .750 (19.1) 1.181 (30.0) .750 (19.1) Dash No. 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 20 22 24 TABLE IV: CABLE ENTRY N L M Dia Dia Dia .312 (7.9) .125 (3.2) .250 (6.4) .375 (9.5) .188 (4.8) .312 (7.9) .438 (11.1) .250 (6.4) .375 (9.5) .500 (12.7) .312 (7.9) .438 (11.1) .562 (14.3) .375 (9.5) .500 (12.7) .625 (15.9) .438 (11.1) .562 (14.3) .688 (17.5) .500 (12.7) .625 (15.9) .750 (19.1) .562 (14.3) .688 (17.5) .812 (20.6) .625 (15.9) .750 (19.1) .875 (22.2) .688 (17.5) .812 (20.6) .938 (23.8) .750 (19.1) .875 (22.2) .812 (20.6) .938 (23.8) 1.000 (25.4) .875 (22.2) 1.000 (25.4) 1.062 (27.0) .938 (23.8) 1.062 (27.0) 1.125 (28.6) 1.000 (25.4) 1.125 (28.6) 1.188 (30.2) 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 1.125 (28.6) 1.250 (31.8) 1.312 (33.3) 1.250 (31.8) 1.375 (34.9) 1.438 (36.5) 1.375 (34.9) 1.500 (38.1) 1.562 (39.7) 1.500 (38.1) 1.625 (41.3) 1.688 (42.9) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied (not available on Function C). Dimensions D, E, F and G will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. 4. Angular function "C", low-profile split elbow, not available with "S" connector designator. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 33 440 440-070 EMI/RFI Dual Banding Adapter