440AJ030M24

440-030 EMI/RFI Banding and Shrink Boot Adapter Rotatable Coupling - Standard Profile 440 F S 030 M 20 12-8 B P T 440 CONNECTOR DESIGNATORS Product Series Connector Designator Shrink Boot (Table IV Omit for none) Polysulfide (Omit for none) A-F-H-L ROTATABLE COUPLING Angle and Profile H = 45 J = 90 S = Straight Basic Part No. Finish (Table II) Shell Size (Table I) B = Band K = Precoiled Band (Omit for none) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Cable Entry (Table IV) Length ** O-Ring ** Length ± .060 (1.52) Min. Order Length 1.5 inch .135 (3.4) (See Note 4) .075 (1.9) Ref. K* L* M* * (Table IV) Length ± .060 (1.52) Min. Order A Thread Length 2.0 inch (Table I) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) .88 (22.4) Max E (Table III) .060 (1.5) .380 (9.7) G (Table III) F (Table III) STYLE 2 (45° & 90° See Note 1) H (Table III) Termination Area Free of Cadmium. Knurl or Ridges Mfr's Option Band Option (K Option Shown See Note 6) © 2005 Glenair, Inc. Polysulfide Stripes P Option CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 440 - Page 12 Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E *** G *** F H *** Conn. Desig. Max Max Max Max H A-F-L .531 (13.5) .639 (16.2) 1.110 (28.2) .940 (23.9) 08 09 .594 (15.1) 1.000 (25.4) .664 (16.9) 1.140 (29.0) 11 10 .618 (15.7) 1.050 (26.7) .688 (17.5) 1.160 (29.5) 13 12 .656 (16.7) 1.090 (27.7) .705 (17.9) 1.190 (30.2) 14 15 .688 (17.5) 1.150 (29.2) .732 (18.6) 1.210 (30.7) 17 16 .748 (19.0) 1.190 (30.2) .803 (20.4) 1.221 (31.0) 18 19 .773 (19.6) 1.250 (31.8) 1.031 (26.2) 1.281 (32.5) 21 20 .800 (20.3) 1.320 (33.5) 1.156 (29.4) 1.351 (34.3) 23 22 .823 (20.9) 1.380 (35.1) 1.219 (31.0) 1.410 (35.8) 24 25 1.041 (26.4) 1.500 (38.1) 1.281 (32.5) 1.531 (38.9) 28 1.092 (27.7) 1.620 (41.1) 1.593 (40.5) 1.651 (41.9) 32 1.136 (28.9) 1.750 (44.5) 1.718 (43.6) 1.781 (45.2) 36 *** These maximum dimensions are increased by .187 (4.7) when parts are fabricated from stainless steel, and connector designator is “S”. TABLE IV: CABLE ENTRY Dash L M K No. 01 .125 (3.2) .250 (6.4) .312 (7.9) 31 .188 (4.8) .312 (7.9) .374 (9.5) 02 .250 (6.4) .375 (9.5) .437 (11.1) 32 .312 (7.9) .438 (11.1) .500 (12.7) .500 (12.7) .562 (14.3) 03 .375 (9.5) 33 .438 (11.1) .562 (14.3) .624 (15.8) 04 .500 (12.7) .625 (15.9) .687 (17.4) 34 .562 (14.3) .688 (17.5) .750 (19.1) 05 .625 (15.9) .750 (19.1) .812 (20.6) .812 (20.6) .874 (22.2) 35 .688 (17.5) 06 .750 (19.1) .875 (22.2) .937 (23.8) .938 (23.8) 1.000 (25.4) 36 .812 (20.6) 07 .875 (22.2) 1.000 (25.4) 1.062 (27.0) 37 .938 (23.8) 1.062 (27.0) 1.124 (28.5) 08 1.000 (25.4) 1.125 (28.6) 1.187 (30.1) 38 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 1.250 (31.8) 1.312 (33.3) 09 1.125 (28.6) 10 1.250 (31.8) 1.375 (34.9) 1.437 (36.5) 11 1.375 (34.9) 1.500 (38.1) 1.562 (39.7) 12 1.500 (38.1) 1.625 (41.3) 1.687 (42.8) 13 1.625 (41.3) 1.750 (44.5) 1.812 (46.0) 1.875 (47.6) 1.937 (49.2) 14 1.750 (44.5) 15 1.875 (47.6) 2.000 (50.8) 2.062 (52.4) 16 2.000 (50.8) 2.125 (54.0) 2.187 (55.5) **** Raychem Shrink Boot Supplied with "T" Option (see Part Number Development) © 2005 Glenair, Inc. Shrink Boot **** n/a 202K121-25-0 202K121-25-0 202K121-25-0 202K121-25-0 202K132-25-0 202K132-25-0 202K132-25-0 202K132-25-0 202K142-25-0 202K142-25-0 202K153-25-0 202K153-25-0 202K153-25-0 202K153-25-0 202K163-25-0 202K163-25-0 202K163-25-0 202K174-25-0 202K174-25-0 202K174-25-0 202K185-25-0 202K185-25-0 202K185-25-0 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Interface O-Ring not supplied with Connector Designator A. 4. Consult factory for shorter lengths on straight backshells. 5. See page 40 Shrink Boot Reference Information. 6. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. Now Available with the NESTOR Add “-445” to Specify Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. See Page 41 for Details. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 440 - Page 13 440 440-030 EMI/RFI Banding and Shrink Boot Adapter