440FH-075-M1605-8KP

EMI Shielding Accessories Product Series Connector Designator Self-Locking Rotatable Coupling - Standard Profile 440-075 EMI/RFI Banding Adapter Basic Number Shell Size (See Table I) Length (S Only) (1/2 inch increments e.g. 8 = 4.000 Inches) Polysulfide P - Polysulfide (Omit for None) 440 - F S - 075 - NF Angle and Profile H - 45º J - 90º S - Straight Finish (See Table II) 16 12 - 8 Cable Entry (See Table IV) K P Cable Termination B - Band K - Precoiled Band (Omit for None) CONNECTOR DESIGNATOR: A - MIL-DTL-5015 / -26482 / -83723 F - MIL-DTL-38999 Series I, II H - MIL-DTL-38999 Series III and IV SELF-LOCKING A Thread (Table I) E Typ. (Table I) Anti-Rotation Device (Typ.) (Table III) Length* * Length ± .060 (1.52) Min. Order Length 1.0 Inch (See Note 3) K** L** **(Table IV) ROTATABLE COUPLING STANDARD PROFILE 1.00 (25.4) Max .060 (1.5) Typ. .380 (9.7) Typ. H (Table III) F G (Table III) STYLE 2 (45° & 90° See Note 1) Termination Area Free of Cadmium. Knurl or Ridges Mfr's Option J (Table III) Length ± .060 (1.52) Min. Order Length 2.0 Inch H Band Option (K Option Shown - See Note 4) Polysulfide Stripes P Option STYLE 2 (STRAIGHT See Note 1) © 2008 Glenair, Inc. www.glenair.com CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com H-20 Self-Locking Rotatable Coupling - Standard Profile See Page H-2 for Table I: Backshell Interface Dimensions TABLE III: ELBOW DIMENSIONS F Max .795 (20.2) .820 (20.8) .844 (21.4) .861 (21.9) .888 (22.6) .904 (23.0) .929 (23.6) .956 (24.3) .979 (24.9) G Max .890 (22.6) .920 (23.4) .940 (23.9) .970 (24.6) .990 (25.1) 1.000 (25.4) 1.020 (25.9) 1.060 (26.9) 1.090 (27.7) H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) J Max 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.190 (30.2) 1.250 (31.8) 1.270 (32.3) 1.330 (33.8) 1.410 (35.8) 1.480 (37.6) 440-075 EMI/RFI Banding Adapter Shell Size Conn. Desig. A-F-L-S 08 10 12 14 16 18 20 22 24 H 09 11 13 15 17 19 21 23 25 Dash No. 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 20 22 24 TABLE IV: CABLE ENTRY K Dia .125 (3.2) .188 (4.8) .250 (6.4) .312 (7.9) .375 (9.5) .438 (11.1) .500 (12.7) .562 (14.3) .625 (15.9) .688 (17.5) .750 (19.1) .812 (20.6) .875 (22.2) .938 (23.8) 1.000 (25.4) 1.062 (27.0) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) L Dia .250 (6.4) .312 (7.9) .375 (9.5) .438 (11.1) .500 (12.7) .562 (14.3) .625 (15.9) .688 (17.5) .750 (19.1) .812 (20.6) .875 (22.2) .938 (23.8) 1.000 (25.4) 1.062 (27.0) 1.125 (28.6) 1.188 (30.2) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) Glenair Symbol B M NF MT TABLE II: FINISHES Finish Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab over Electroless Nickel Ni-PTFE 1000 Hour GreyTM Nickel Fluorocarbon Polymer Consult Factory for Additional Finish Options 1. When maximum cable entry is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. © 2008 Glenair, Inc. www.glenair.com CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com H-21 EMI Shielding Accessories H