440FJ031M22

440-031 EMI/RFI Banding and Shrink Boot Adapter Direct Coupling - Standard Profile 440 CONNECTOR DESIGNATORS * * Conn. Desig. B See Note 5 440 F S 031 M 20 12-8 B P T Product Series Connector Designator Polysulfide (Omit for none) B = Band K = Precoiled Band (Omit for none) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Cable Entry (Table V) ** Length ± .060 (1.52) Min. Order Length 1.5 inch (See Note 3) Shrink Boot (Table V Omit for none) A-B -C-D-E-F Angle and Profile 45 G-H-J-K-L-S H==90 J S = Straight Basic Part No. Finish (Table II) DIRECT COUPLING Shell Size (Table I) O-Ring Length ± .060 (1.52) Min. Order Length 2.0 Inch A Thread (See Note 3) (Table I) Length ** .135 (3.4) Typ. .075 (1.9) Ref. STYLE 2 (STRAIGHT See Note 1) B Typ. (Table I) K* L* M* .380 (9.7) Typ. J (Table III) .060 (1.5) Typ. J (Table III) G (Table IV) * (Table V) E (Table IV) B (Table I) F (Table IV) B (Table I) H (Table IV) Termination Area Free of Cadmium. Knurl or Ridges Mfr's Option Polysulfide Stripes P Option © 2005 Glenair, Inc. Band Option (K Option Shown See Note 6) CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 440 - Page 18 Direct Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS G F E Dash Max Max Max No.(s) .625 (15.9) .940 (23.9) .732 (18.6) 01 02 & 31 .625 (15.9) .940 (23.9) .732 (18.6) 03 & 32 .688 (17.5) 1.000 (25.4) .757 (19.2) 04 & 33 .711 (18.1) 1.050 (26.7) .781 (19.8) 05 & 34 .781 (19.8) 1.150 (29.2) .825 (21.0) 06 & 35 .841 (21.4) 1.188 (30.2) .896 (22.8) 07 & 36 .866 (22.0) 1.208 (30.7) 1.093 (27.8) 08 & 37 .893 (22.7) 1.248 (31.7) 1.250 (31.8) 09 & 38 .916 (23.3) 1.278 (32.5) 1.312 (33.3) 10 1.134 (28.8) 1.448 (36.8) 1.375 (34.9) 11 1.134 (28.8) 1.448 (36.8) 1.375 (34.9) 12 1.185 (30.1) 1.488 (37.8) 1.687 (42.8) 13 1.185 (30.1) 1.488 (37.8) 1.687 (42.8) 14 1.225 (31.1) 1.538 (39.1) 1.812 (46.0) 15 1.225 (31.1) 1.538 (39.1) 1.812 (46.0) H Max 1.078 (27.4) 1.078 (27.4) 1.108 (28.1) 1.128 (28.7) 1.178 (29.9) 1.190 (30.2) 1.250 (31.8) 1.320 (33.5) 1.380 (35.1) 1.500 (38.1) 1.500 (38.1) 1.620 (41.1) 1.620 (41.1) 1.750 (44.5) 1.750 (44.5) Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE V: CABLE ENTRY Dash No. L M K .250 (6.4) .312 (7.9) 01 .125 (3.2) 31 .188 (4.8) .312 (7.9) .374 (9.5) .375 (9.5) .437 (11.1) 02 .250 (6.4) 32 .312 (7.9) .438 (11.1) .500 (12.7) 03 .375 (9.5) .500 (12.7) .562 (14.3) 33 .438 (11.1) .562 (14.3) .624 (15.8) 04 .500 (12.7) .625 (15.9) .687 (17.4) .688 (17.5) .750 (19.1) 34 .562 (14.3) 05 .625 (15.9) .750 (19.1) .812 (20.6) .812 (20.6) .874 (22.2) 35 .688 (17.5) 06 .750 (19.1) .875 (22.2) .937 (23.8) 36 .812 (20.6) .938 (23.8) 1.000 (25.4) 1.000 (25.4) 1.062 (27.0) 07 .875 (22.2) 37 .938 (23.8) 1.062 (27.0) 1.124 (28.5) 1.125 (28.6) 1.187 (30.1) 08 1.000 (25.4) 38 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 09 1.125 (28.6) 1.250 (31.8) 1.312 (33.3) 1.375 (34.9) 1.437 (36.5) 10 1.250 (31.8) 11 1.375 (34.9) 1.500 (38.1) 1.562 (39.7) 1.625 (41.3) 1.687 (42.8) 12 1.500 (38.1) 13 1.625 (41.3) 1.750 (44.5) 1.812 (46.0) 1.875 (47.6) 1.937 (49.2) 14 1.750 (44.5) 15 1.875 (47.6) 2.000 (50.8) 2.062 (52.4) 16 2.000 (50.8) 2.125 (54.0) 2.187 (55.5) * Raychem Shrink Boot Supplied with "T" Option (see Part Number Development) © 2005 Glenair, Inc. Shrink Boot * n/a 202K121-25-0 202K121-25-0 202K121-25-0 202K121-25-0 202K132-25-0 202K132-25-0 202K132-25-0 202K132-25-0 202K142-25-0 202K142-25-0 202K153-25-0 202K153-25-0 202K153-25-0 202K153-25-0 202K163-25-0 202K163-25-0 202K163-25-0 202K174-25-0 202K174-25-0 202K174-25-0 202K185-25-0 202K185-25-0 202K185-25-0 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. See page 40 for Shrink Boot Reference Information. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. 6. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 440 - Page 19 440 440-031 EMI/RFI Banding and Shrink Boot Adapter