440FJ063M20

440-063 EMI/RFI Crimp Ring Adapter Rotatable Coupling - Standard Profile 440 F S 063 M 16 32-6 440 CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile H = 45 J = 90 S = Straight Basic Part No. Length * A-F-H-L-S ROTATABLE COUPLING Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Cable Entry (Table IV) Shell Size (Table I) Finish (Table II) Length ± .060 (1.52) Min. Order Length 2.0 inch (See Note 5) A Thread (Table I) O-Ring K (Table IV) See inside back cover fold-out or pages 13 and 14 for Tables I and II. L** M** C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) Crimp Ring * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 5) P** R** .88 (22.4) Max E (Table III) ** (Table IV) N** F (Table III) G (Table III) STYLE 2 (45° & 90° See Note 1) H (Table III) Add “-445” to Specify Glenair’s Non-Detent, ("NESTOR") Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 440 - Page 4 Rotatable Coupling - Standard Profile 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. For proper installation of crimp ring, use Thomas & Betts (or equivalent) installation dies listed (Table IV) for each dash no. 3. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Interface O-Ring not supplied with Connector Designator A. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 E Max .639 (16.2) .664 (16.9) .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) F Max .702 (17.8) .732 (18.6) 1.040 (26.4) 1.070 (27.2) 1.090 (27.7) 1.100 (27.9) 1.120 (28.4) 1.160 (29.5) 1.190 (30.2) G Max .750 (19.1) .812 (20.6) .875 (22.2) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) H Max .812 (20.6) .875 (22.2) 1.220 (31.0) 1.290 (32.8) 1.350 (34.3) 1.370 (34.8) 1.430 (36.3) 1.510 (38.4) 1.580 (40.1) TABLE IV: CABLE ENTRY K Dash Nom No. 06 .312 (7.9) 10 .312 (7.9) 13 .312 (7.9) 16 .312 (7.9) 20 .312 (7.9) 23 .312 (7.9) 26 .312 (7.9) 29 .312 (7.9) 30 .312 (7.9) 31 .312 (7.9) 32 .600 (15.2) 33 .600 (15.2) 34 .600 (15.2) 35 .600 (15.2) 36 .600 (15.2) 38 .600 (15.2) 39 .600 (15.2) 40 .600 (15.2) 41 .600 (15.2) 42 .600 (15.2) 43 .600 (15.2) 44 .600 (15.2) 45 .600 (15.2) 46 .600 (15.2) 47 .600 (15.2) 48 .600 (15.2) 49 .600 (15.2) 50 .600 (15.2) 51 .600 (15.2) 52 .600 (15.2) 53 .600 (15.2) 54 .600 (15.2) © 2005 Glenair, Inc. L Nom .090 (2.3) .124 (3.1) .149 (3.8) .175 (4.4) .219 (5.6) .250 (6.4) .275 (7.0) .297 (7.5) .312 (7.9) .375 (9.5) .430 (10.9) .550 (14.0) .670 (17.0) .810 (20.6) .920 (23.4) 1.040 (26.4) 1.122 (28.5) 1.224 (31.1) 1.353 (34.4) 1.425 (36.2) 1.550 (39.4) 1.675 (42.5) 1.800 (45.7) 1.925 (48.9) 2.050 (52.1) 2.175 (55.2) 2.300 (58.4) 2.425 (61.6) 2.530 (64.3) 2.655 (67.4) 2.780 (70.6) 2.905 (73.8) M Nom .113 (2.9) .145 (3.7) .179 (4.5) .215 (5.5) .250 (6.4) .281 (7.1) .306 (7.8) .335 (8.5) .365 (9.3) .406 (10.3) .500 (12.7) .620 (15.7) .750 (19.1) .880 (22.4) 1.000 (25.4) 1.120 (28.4) 1.192 (30.3) 1.294 (32.9) 1.423 (36.1) 1.545 (39.2) 1.670 (42.4) 1.795 (45.6) 1.920 (48.8) 2.045 (51.9) 2.170 (55.1) 2.295 (58.3) 2.420 (61.5) 2.545 (64.6) 2.670 (67.8) 2.795 (71.0) 2.920 (74.2) 3.045 (77.3) N Nom .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) P Nom .156 (4.0) .187 (4.7) .225 (5.7) .261 (6.6) .297 (7.5) .327 (8.3) .375 (9.5) .405 (10.3) .425 (10.8) .500 (12.7) .590 (15.0) .710 (18.0) .840 (21.3) 1.010 (25.7) 1.130 (28.7) 1.250 (31.8) 1.332 (33.8) 1.440 (36.6) 1.562 (39.7) 1.670 (42.4) 1.795 (45.6) 1.920 (48.8) 2.045 (51.9) 2.170 (55.1) 2.295 (58.3) 2.420 (61.5) 2.545 (64.6) 2.670 (67.8) 2.795 (71.0) 2.920 (74.2) 3.045 (77.3) 3.170 (80.5) R Nom .194 (4.9) .227 (5.8) .256 (6.5) .297 (7.5) .335 (8.5) .372 (9.4) .406 (10.3) .453 (11.5) .473 (12.0) .560 (14.2) .670 (17.0) .790 (20.1) .920 (23.4) 1.090 (27.7) 1.210 (30.7) 1.330 (33.8) 1.412 (35.9) 1.520 (38.6) 1.643 (41.7) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) 2.250 (57.2) 2.375 (60.3) 2.500 (63.5) 2.625 (66.7) 2.750 (69.9) 2.875 (73.0) 3.000 (76.2) 3.125 (79.4) 3.250 (82.6) Color Code (Ref.) Yellow Orange Purple Yellow Green Tin Yellow Red Tin Green Red Blue Gray Brown Green Pink Orange Purple Yellow Red Blue Gray Brown Green Pink Orange Purple Yellow Red Blue Gray Brown Inst. Tool Die No. (Note 2) WT402 WT406 WT409 WT411 WT414 WT416 WT440/5451 WT440/5452 WT440/5454 WT440/5457 GS590 GS710 GS840 GS1010 GS1130 GS1250 GS1332 GS1440 GS1563 GS1670 GS1795 GS1920 GS2045 GS2170 GS2295 GS2420 GS2545 GS2670 GS2795 GS2920 GS3045 GS3170 CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 440 - Page 5 440 440-063 EMI/RFI Crimp Ring Adapter