440FT143XM14

Micro-Banding Backshell with Qwik-Ty, Shrink Boot Porch and Self-Locking Rotatable Coupling CONNECTOR DESIGNATOR: Angle and Profile S - Straight T - 45° Elbow W - 90° Elbow Product Series 440 - EMI/RFI Non-Environmental Micro-Banding Backshells Cable Entry (See Table IV) Omit for 90° Configuration Finish Symbol (See Table III) Drain Hole Option (Omit "D" if not required) Shrink Boot Option Shrink boot supplied with T option Available for S and T profiles only (Omit for none) 440-143 Composite Ultra Low Profile EMI/RFI Composite Backshells A F H MIL-DTL-38999 Series I, II MIL-DTL-38999 Series III and IV SELF-LOCKING ROTATABLE COUPLING ULTRA LOW PROFILE Basic Part Number 440 H S 143 XM 15 09 D K T S Band Option Band supplied with K option (Omit for none) Slot Option S - Pigtail Termin. Slot (Omit for none) B Connector Designator F or H Connector Shell Size (See Table II) Anti-Decoupling Device TYP C H .962 Max .320 TYP A A Pigtail Termination Slot J D Dia. Typ Shrink Sleeve or Boot Groove Typ N D Raised Configuration (Mfr's Option) Optional ø.125 Drain Holes Minimum 3 Spaced Equally TYP Optional ø.125 Drain Holes 3 Minimum Equally Spaced E AS33671 Tie Strap or Equivalent Qwik-Ty Strain Relief G Shrink Sleeve or Boot Lip Accomodates 600-057-1 Micro Band .32 K F L EF M G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-68 Micro-Banding Backshell with Qwik-Ty, Shrink Boot Porch and Self-Locking Rotatable Coupling TABLE II: SHELL SIZE Shell Size F 08 10 12 14 16 18 20 22 24 H 09 11 13 15 17 19 21 23 25 Entry Code Available for Straight and 45° Configuration 04 05 07 09 05 and 11 07 and 13 09 and 15 11 and 16 07, 13 and 17 K ± .03 1.042 (26.5) 1.107 (28.1) 1.174 (29.8) 1.241 (31.5) 1.305 (33.1) 1.371 (34.8) 1.438 (36.5) 1.505 (38.2) 1.572 (39.9) L .304 (7.7) .432 (11.0) .546 (13.9) .670 (17.0) .796 (20.2) .902 (22.9) 1.027 (26.1) 1.152 (29.3) 1.276 (32.4) M .160 (4.1) .174 (4.4) .195 (5.0) .315 (8.0) .385 (9.8) .445 (11.3) .525 (13.3) .595 (15.1) .655 (16.6) N Max .63 (16.0) .66 (16.8) .72 (18.3) .83 (21.1) .91 (23.1) .93 (23.6) 1.04 (26.4) 1.12 (28.4) 1.18 (30.0) TABLE III: FINISH Symbol XM XMT XW Finish Description 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel TABLE IV: CABLE ENTRY Dash Number 04 05 07 09 11 13 15 16 17 D ± .03 .25 (6.4) .31 (7.9) .44 (11.2) .56 (14.2) .68 (17.3) .81 (20.6) .94 (23.9) 1.00 (25.4) 1.16 (29.5) E ± .020 .187 (4.7) .187 (4.7) .187 (4.7) .219 (5.6) .219 (5.6) .219 (5.6) .219 (5.6) .219 (5.6) .250 (6.4) F ± .020 .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .375 (9.5) .375 (9.5) .375 (9.5) .375 (9.5) .437 (11.1) G ± .020 .512 (13.0) .512 (13.0) .512 (13.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) H ± .06 .72 (18.3) .75 (19.1) .75 (19.1) .76 (19.3) .78 (19.8) .79 (20.1) .82 (20.8) .86 (21.8) .89 (22.6) J ± .09 .87 (22.1) .93 (23.6) 1.00 (25.4) 1.03 (26.2) 1.05 (26.7) 1.06 (26.9) 1.09 (27.7) 1.13 (28.7) 1.16 (29.5 ) NOTES 1. 2. 3. 770-001S**-0 shrink boot supplied with T option. See shrink boot product page for more details. Coupling nut supplied unplated. See Table I in Intro for front-end dimensional details. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-69 Composite Backshells 440-143 Composite Ultra Low Profile EMI/RFI A B C D E F G