440LF084M20

440-084 EMI/RFI Tinel-Lock® Ring Adapter Rotatable Coupling - Split Shell 440 F F 0 84 M 2 0 1 2 AI T 1 Product Series Connector Designator Angle and Profile F = Split 45° D = Split 90° Basic Part No. Finish (Table II) G (Table III) A Thread (Table I) E (Table III) F (Table III) H (Table III) .525 (13.3) Anti-Rotation Device (Typ.) .94 (23.9) Max Tinel-Lock® Ring Supplied (Table V - Omit for none) Cable Entry (Table IV) Shell Size (Table I) Shrink Boot Options (Table IV - Omit for none) 440 CONNECTOR DESIGNATORS A-F-H-L-S ROTATABLE COUPLING FOR TINEL-LOCK® RING TERMINATIONS C Typ. (Table I) .94 (23.9) Max Split 45° .272 (6.9) .135 (3.4) ±.005 (.1) Ref. J L (Table IV) (Table IV) K (Table IV) .88 (22.4) Max Split 90° STYLE 2 (45° & 90° See Note 1) .070 (1.8) Thermochromic Paint (Note 4) Tinel-Lock® Ring Option (See Table V) Tinel-Lock® is a registered trademark of Tyco CAGE Code 06324 Printed in U.S.A. © 2005 Glenair, Inc. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 62 EMI/RFI Tinel-Lock® Ring Adapter Rotatable Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size F G E Conn. Desig. Max Max Max H A-F-L-S .62 (15.7) .684 (17.4) .664 (16.9) 08 09 .68 (17.3) .754 (19.2) .664 (16.9) 11 10 .75 (19.1) .814 (20.7) .724 (18.4) 12 13 .78 (19.8) .874 (22.2) .784 (19.9) 15 14 .88 (22.4) .934 (23.7) .844 (21.4) 17 16 .94 (23.9) 1.004 (25.5) .914 (23.2) 18 19 .984 (25.0) 1.00 (25.4) 1.064 (27.0) 21 20 22 23 1.044 (26.5) 1.06 (26.9) 1.124 (28.5) 25 1.104 (28.0) 1.12 (28.4) 1.184 (30.1) 24 TABLE IV: CABLE ENTRY L +.008 (.2) Shrink Boot -.000 (.0) Option T1* .044 (1.1) 202K121-25-0 .044 (1.1) 202K132-25-0 .044 (1.1) 202K132-25-0 .044 (1.1) 202K142-25-0 .044 (1.1) 202K142-25-0 .044 (1.1) 202K153-25-0 .044 (1.1) 202K153-25-0 .069 (1.8) 202K163-25-0 .069 (1.8) 202K163-25-0 .069 (1.8) 202K174-25-0 .069 (1.8) 202K174-25-0 H Max .56 (14.2) .62 (15.7) .69 (17.5) .72 (18.3) .81 (20.6) .87 (22.1) .94 (23.9) 1.00 (25.4) 1.06 (26.9) J Dash I.D. No. .250 (6.4) 04 .312 (7.9) 05 .375 (9.5) 06 .437 (11.1) 07 .500 (12.7) 08 .625 (15.9) 10 .750 (19.1) 12 .875 (22.2) 14 16 1.000 (25.4) 18 1.125 (28.6) 20 1.250 (31.8) K Dia Max .375 (9.5) .437 (11.1) .500 (12.7) .562 (14.3) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) Shrink Boot Option T2* 202K121-100-0 202K132-100-0 202K132-100-0 202K142-100-0 202K142-100-0 202K153-100-0 202K153-100-0 202K163-100-0 202K163-100-0 202K174-100-0 202K174-100-0 Tinel-Lock® Ring Entry Size 04 05 06 07 08 10 12 14 16 18 20 * Raychem Shrink Boot and Epoxy/Polyamide Two Part Adhesive Paste (S1125) Supplied with "T1" Option (See Part Number Development) ** Raychem Shrink Boot and Hot-Melt/Polyolyfin Adhesive Supplied with "T2" Option (See Part Number Development) - This is a Halogen Free System 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. See page 40 for Shrink Boot Reference Information. 4. The Tinel-Lock® ring designator must be specified according to the type of cable braid used. Tinel-Lock® rings are marked with thermochromic paint which changes color when the correct installation temperature is reached. BI rings are identified with a red spot. © 2005 Glenair, Inc. CAGE Code 06324 TABLE V: TINEL-LOCK® RING Ring Braid Type Designator Single Layer 36 AWG AI Single Layer 34 AWG AI Single Layer 32 AWG BI Single Layer 30 AWG BI Double Layer 36 AWG BI Double Layer 34 AWG BI Double Layer 32 AWG CI Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 63 440 440-084