440LH075NF14

440-075 EMI/RFI Banding Adapter Self-Locking Rotatable Coupling - Standard Profile 440 F S 075 NF 16 12-8 K P 440 CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile H = 45 J = 90 S = Straight Basic Part No. Polysulfide (Omit for none) B = Band K = Precoiled Band (Omit for none) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Cable Entry (Table IV) A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING Finish (Table II) Length ± .060 (1.52) Min. Order Length 2.0 Inch Shell Size (Table I) A Thread (Table I) Length * * Length ± .060 (1.52) Min. Order Length 1.0 Inch (See Note 3) K ** L ** ** (Table IV) E Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) Anti-Rotation Device (Typ.) .060 (1.5) Typ. .380 (9.7) Typ. 1.00 (25.4) Max F (Table III) H (Table III) G (Table III) STYLE 2 (45° & 90° See Note 1) J (Table III) Termination Area Free of Cadmium. Knurl or Ridges Mfr's Option Band Option (K Option Shown See Note 4) © 2005 Glenair, Inc. Polysulfide Stripes P Option CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 54 Self-Locking Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 09 08 10 11 13 12 15 14 16 17 19 18 20 21 23 22 25 24 F Max .795 (20.2) .820 (20.8) .844 (21.4) .861 (21.9) .888 (22.6) .904 (23.0) .929 (23.6) .956 (24.3) .979 (24.9) G Max .890 (22.6) .920 (23.4) .940 (23.9) .970 (24.6) .990 (25.1) 1.000 (25.4) 1.020 (25.9) 1.060 (26.9) 1.090 (27.7) H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) J Max 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.190 (30.2) 1.250 (31.8) 1.270 (32.3) 1.330 (33.8) 1.410 (35.8) 1.480 (37.6) TABLE IV: CABLE ENTRY K L Dash Dia Dia No. .125 (3.2) .250 (6.4) 02 .188 (4.8) .312 (7.9) 03 .250 (6.4) .375 (9.5) 04 .312 (7.9) .438 (11.1) 05 .375 (9.5) .500 (12.7) 06 .438 (11.1) .562 (14.3) 07 .500 (12.7) .625 (15.9) 08 .562 (14.3) .688 (17.5) 09 .625 (15.9) .750 (19.1) 10 .688 (17.5) .812 (20.6) 11 .750 (19.1) .875 (22.2) 12 .812 (20.6) .938 (23.8) 13 .875 (22.2) 1.000 (25.4) 14 .938 (23.8) 1.062 (27.0) 15 16 1.000 (25.4) 1.125 (28.6) 17 1.062 (27.0) 1.188 (30.2) 18 1.125 (28.6) 1.250 (31.8) 20 1.250 (31.8) 1.375 (34.9) 22 1.375 (34.9) 1.500 (38.1) 24 1.500 (38.1) 1.625 (41.3) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 55 440 440-075 EMI/RFI Banding Adapter