440SH086M18

440-086 EMI/RFI Tinel-Lock® Ring Adapter Self-Locking Rotatable Coupling - Standard Profile 440 CONNECTOR DESIGNATORS 440 F S 0 86 M 20 12-8 AI T1 Product Series Connector Designator Angle and Profile H = 45° J = 90° S = Straight Basic Part No. Cable Entry (Table IV) Finish (Table II) Shell Size (Table I) O-Ring A Thread (Table I) Length ** ** Length ± .060 (1.52) Min. Order Length 1.0 inch (See Note 4) M (Table IV) K* L* * (Table IV) Tinel-Lock® Ring Supplied (Table V - Omit for none) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Shrink Boot Options (Table IV - Omit for none) A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING FOR TINEL-LOCK® RING TERMINATIONS Length ± .060 (1.52) Min. Order Length 2.0 inch E Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) 1.00 (25.4) Max F (Table III) Anti-Rotation Device (Typ.) .135 (3.4) ±.005 (.1) .272 (6.9) Ref. .525 (13.3) H (Table III) STYLE 2 (45° & 90° See Note 1) G (Table III) J (Table III) .070 (1.8) Thermochromic Paint (Note 6) Tinel-Lock® Ring Option (See Table V) © 2005 Glenair, Inc. Note: The Tinel-Lock® ring designator must be specified according to the type of cable braid used. Tinel-Lock® rings are marked with thermochromic paint which changes color when the correct installation temperature is reached. BI rings are identified with a red spot. CI rings are identified with a blue spot. Tinel-Lock® is a registered trademark of Tyco CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 66 Self-Locking Rotatable Coupling - Standard Profile TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 03 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 25 24 28 32 36 40 44 48 61 F Max .796 (20.2) .796 (20.2) .816 (20.7) .846 (21.5) .866 (22.0) .886 (22.5) .906 (23.0) .926 (23.5) .956 (24.3) .976 (24.8) 1.196 (30.4) 1.246 (31.6) 1.296 (32.9) 1.336 (33.9) 1.396 (35.5) 1.446 (36.7) 1.156 (29.4) G Max .89 (22.6) .89 (22.6) .92 (23.4) .94 (23.9) .97 (24.6) .99 (25.1) 1.00 (25.4) 1.02 (25.9) 1.06 (26.9) 1.09 (27.7) 1.26 (32.0) 1.30 (33.0) 1.35 (34.3) 1.39 (35.3) 1.44 (36.6) 1.49 (37.8) 1.21 (30.7) H Max .906 (23.0) .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) 1.636 (41.6) 1.766 (44.9) 1.876 (47.7) 1.986 (50.4) 2.106 (53.5) 2.236 (56.8) 1.546 (39.3) J Max 1.00 (25.4) 1.00 (25.4) 1.06 (26.9) 1.12 (28.4) 1.19 (30.2) 1.25 (31.8) 1.27 (32.3) 1.33 (33.8) 1.41 (35.8) 1.48 (37.6) 1.72 (43.7) 1.81 (46.0) 1.92 (48.8) 2.03 (51.6) 2.16 (54.9) 2.28 (57.9) 1.57 (39.9) Tinel-Lock® Ring Entry Size 04 05 06 07 08 10 12 14 16 18 20 See inside back cover fold-out or pages 13 and 14 for Tables I and II. Dash K No. I.D. 04 .250 (6.4) 05 .312 (7.9) 06 .375 (9.5) 07 .437 (11.1) 08 .500 (12.7) 10 .625 (15.9) 12 .750 (19.1) 14 .875 (22.2) 16 1.000 (25.4) 18 1.125 (28.6) 20 1.250 (31.8) L Dia Max .375 (9.5) .437 (11.1) .500 (12.7) .562 (14.3) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) TABLE IV: CABLE ENTRY M +.008 (.2) Shrink Boot -.000 (.0) Option T1* .044 (1.1) 202K121-25-0 .044 (1.1) 202K132-25-0 .044 (1.1) 202K132-25-0 .044 (1.1) 202K142-25-0 .044 (1.1) 202K142-25-0 .044 (1.1) 202K153-25-0 .044 (1.1) 202K153-25-0 .069 (1.8) 202K163-25-0 .069 (1.8) 202K163-25-0 .069 (1.8) 202K174-25-0 .069 (1.8) 202K174-25-0 Shrink Boot Option T2* 202K121-100-0 202K132-100-0 202K132-100-0 202K142-100-0 202K142-100-0 202K153-100-0 202K153-100-0 202K163-100-0 202K163-100-0 202K174-100-0 202K174-100-0 * Raychem Shrink Boot and Epoxy/Polyamide Two Part Adhesive Paste (S1125) Supplied with "T1" Option (See Part Number Development) ** Raychem Shrink Boot and Hot-Melt/Polyolyfin Adhesive Supplied with "T2" Option (See Part Number Development) - This is a Halogen Free System 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Interface O-Ring not supplied with Connector Designator A. 4. Consult factory for shorter lengths on straight backshells. 5. See pages 40 for Shrink Boot Reference Information. TABLE V: TINEL-LOCK® RING Ring Braid Type Designator Single Layer 36 AWG AI Single Layer 34 AWG AI Single Layer 32 AWG BI Single Layer 30 AWG BI Double Layer 36 AWG BI Double Layer 34 AWG BI Double Layer 32 AWG CI Printed in U.S.A. © 2005 Glenair, Inc. CAGE Code 06324 www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 67 440 440-086 EMI/RFI Tinel-Lock® Ring Adapter