440SJ072NF24

440-072 EMI/RFI Dual Banding Adapter Self-Locking Rotatable Coupling - Standard Profile 440 F S 072 NF 16 12-8 K P 440 CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile H = 45 J = 90 S = Straight Basic Part No. Polysulfide (Omit for none) B = 2 Bands K = 2 Precoiled Bands (Omit for none) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Cable Entry (Table IV) A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING Finish (Table II) Length ± .060 (1.52) Min. Order Length 2.0 inch A Thread (Table I) Shell Size (Table I) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 3) E Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) K* L* M* * (Table IV) Anti-Rotation Device (Typ.) .060 (1.5) Typ. .380 (9.7) Typ. 1.00 (25.4) Max F (Table III) H (Table III) G (Table III) STYLE 2 (45° & 90° See Note 1) Termination Areas Free of Cadmium. Knurl or Ridges Mfr's Option J (Table III) Band Option (K Option Shown See Note 4) © 2005 Glenair, Inc. Polysulfide Stripes P Option CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 38 Self-Locking Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 F Max .795 (20.2) .820 (20.8) .844 (21.4) .861 (21.9) .888 (22.6) .904 (23.0) .929 (23.6) .956 (24.3) .979 (24.9) G Max 1.328 (33.7) 1.358 (34.5) 1.378 (35.0) 1.408 (35.8) 1.428 (36.3) 1.438 (36.5) 1.458 (37.0) 1.498 (38.0) 1.528 (38.8) H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) J Max 1.438 (36.5) 1.498 (38.0) 1.558 (39.6) 1.628 (41.4) 1.688 (42.9) 1.708 (43.4) 1.768 (44.9) 1.848 (46.9) 1.918 (48.7) TABLE IV: CABLE ENTRY M K L Dash Dia Dia Dia No. .312 (7.9) .125 (3.2) .250 (6.4) 02 .375 (9.5) .188 (4.8) .312 (7.9) 03 .438 (11.1) .250 (6.4) .375 (9.5) 04 .500 (12.7) .312 (7.9) .438 (11.1) 05 .562 (14.3) .375 (9.5) .500 (12.7) 06 .625 (15.9) .438 (11.1) .562 (14.3) 07 .688 (17.5) .500 (12.7) .625 (15.9) 08 .750 (19.1) .562 (14.3) .688 (17.5) 09 .812 (20.6) .625 (15.9) .750 (19.1) 10 .875 (22.2) .688 (17.5) .812 (20.6) 11 .938 (23.8) .750 (19.1) .875 (22.2) 12 .812 (20.6) .938 (23.8) 1.000 (25.4) 13 .875 (22.2) 1.000 (25.4) 1.062 (27.0) 14 .938 (23.8) 1.062 (27.0) 1.125 (28.6) 15 16 1.000 (25.4) 1.125 (28.6) 1.188 (30.2) 17 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 18 1.125 (28.6) 1.250 (31.8) 1.312 (33.3) 20 1.250 (31.8) 1.375 (34.9) 1.438 (36.5) 22 1.375 (34.9) 1.500 (38.1) 1.562 (39.7) 24 1.500 (38.1) 1.625 (41.3) 1.688 (42.9) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 39 440 440-072 EMI/RFI Dual Banding Adapter