443FJ009NF22

443-009 Submersible EMI/RFI Cable Sealing Backshell Band-in-a-Can with Strain-Relief Rotatable Coupling - Standard Profile 443 CONNECTOR DESIGNATORS 443 F S 009 NF 16 12-8 H K P Product Series Connector Designator Angle and Profile H = 45° J = 90° S = Straight Basic Part No. Finish (Table II) Shell Size (Table I) Polysulfide (Omit for none) B = Band K = Precoiled Band (Omit for none) Strain Relief Style (H, A, M, D, Tables X & XI) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Dash No. (Table IV) A-F-H-L-S ROTATABLE COUPLING Now Available with the “NESTOR” Add “-445” to Specify Non-Detent SelfLocking Coupling. See Page 41 for Details. Length ± .060 (1.52) Min. Order Length 2.5 inch A Thread (Table I) C Typ. (Table I) Length* O-Rings 1.25 (31.8) Max J (Table IV) STYLE 2 (STRAIGHT See Note 1) .88 (22.4) Max E (Table III) * Length ± .060 (1.52) Min. Order Length 2.0 inch (Consult factory for shorter lengths) G (Table III) F (Table III) STYLE 2 (45° & 90° See Note 1) H (Table III) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option Band Option (K Option Shown See Note 4) © 2005 Glenair, Inc. Polysulfide Stripes P Option CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 443 - Page 2 Band-in-a-Can with Strain-Relief Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 08 09 11 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 E Max .639 (16.2) .664 (16.9) .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) F Max 1.380 (35.1) 1.410 (35.8) 1.430 (36.3) 1.460 (37.1) 1.480 (37.6) 1.490 (37.8) 1.510 (38.4) 1.550 (39.4) 1.580 (40.1) G Max .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) H Max 1.500 (38.1) 1.550 (39.4) 1.610 (40.9) 1.680 (42.7) 1.740 (44.2) 1.760 (44.7) 1.820 (46.2) 1.900 (48.3) 1.970 (50.0) TABLE IV: CABLE ENTRY J Dash Clamp Dia No. Size .125 (3.2) 02 03 .188 (4.8) 03 03 .250 (6.4) 04 03 .312 (7.9) 05 04 .375 (9.5) 06 06 .438 (11.1) 07 06 .500 (12.7) 08 08 .562 (14.3) 09 10 .625 (15.9) 10 10 .688 (17.5) 11 12 .750 (19.1) 12 12 .812 (20.6) 13 16 .875 (22.2) 14 16 .938 (23.8) 15 16 16 20 1.000 (25.4) 17 20 1.062 (27.0) 18 20 1.125 (28.6) 20 20 1.250 (31.8) 22 24 1.375 (34.9) 24 28 1.500 (38.1) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. O-Ring not supplied with Connector Designator A. 4. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. Clamp T Max Size 04 .780 (19.8) 06 .780 (19.8) 08 .780 (19.8) 10 .780 (19.8) 12 .811 (20.6) 16 .905 (23.0) 20 1.092 (27.7) 24 1.124 (28.5) 28 1.399 (35.5) TABLE X: CABLE ENTRY V Cable Range Max Min Max .957 (24.3) .125 (3.2) .312 (7.9) .250 (6.4) .437 (11.1) 1.145 (29.1) .387 (9.8) .562 (14.3) 1.332 (33.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .500 (12.7) .750 (19.1) 1.551 (39.4) 1.770 (45.0) .625 (15.9) .937 (23.8) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) TABLE XI: CABLE ENTRY Clamp Z W X Y Cable Range Size Max Max Max Max Min ** Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) * Not available in Style M clamp. ** Not Applicable Style D STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 443 - Page 3 443 443-009 Submersible EMI/RFI Cable Sealing Backshell