443FJ010NF16

443-010 EMI/RFI Cable Sealing Backshell Band-in-a-Can with Strain-Relief Direct Coupling - Standard Profile 443 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 CONNECTOR DESIGNATORS * 443 F S 010 NF 16 12-8 H K P Product Series Connector Designator Angle and Profile H = 45° J = 90° S = Straight Basic Part No. Finish (Table II) Shell Size (Table I) A Thread (Table I) Length *± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) 1.25 (31.8) Max Polysulfide (Omit for none) B = Band, K = Precoiled Band (Omit for none) Strain Relief Style (H, A, M, D, Tables X & XI) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Dash No. (Table V) DIRECT COUPLING Length ± .060 (1.52) Min. Order Length 2.5 Inch (See Note 4) B (Table I) STYLE 2 (STRAIGHT See Note 1) K (Table V) J E O-Rings F (Table IV) B (Table I) J (Table III) (Table III) (Table IV) G (Table IV) B (Table I) O-Ring H (Table IV) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option Polysulfide Stripes - P Option Band Option (K Option Shown See Note 6) STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 443 - Page 6 Rev. 20-AUG-2008 Band-in-a-Can with Strain-Relief Direct Coupling - Standard Profile TABLE III: FRONT ADAPTER TABLE IV: ELBOW DIMENSIONS J Max - Conn. Designator H Elbow E F G Shell A-E-F Max Size Max Max Max Size J-H-L-S D-B-G-K C 04 .664 (16.9) 1.410 (35.8) .810 (20.6) 1.550 (39.4) 08/09 1.180 (30.0) 1.250 (31.8) 06 .688 (17.5) 1.430 (36.3) .870 (22.1) 1.610 (40.9) 10/11 1.180 (30.0) 1.250 (31.8) 08 .688 (17.5) 1.430 (36.3) .870 (22.1) 1.610 (40.9) 12/13 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 10 .732 (18.6) 1.480 (37.6) .980 (24.9) 1.740 (44.2) 14/15 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 12 .748 (19.0) 1.490 (37.8) 1.020 (25.9) 1.760 (44.7) 16/17 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 16 .773 (19.6) 1.510 (38.4) 1.080 (27.4) 1.820 (46.2) 18/19 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 20 1.041 (26.4) 1.750 (44.5) 1.480 (37.6) 2.210 (56.1) 20/21 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 24 1.041 (26.4) 1.750 (44.5) 1.480 (37.6) 2.210 (56.1) 22/23 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 28 1.092 (27.7) 1.790 (45.5) 1.610 (40.9) 2.300 (58.4) 24/25 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) TABLE V: CABLE ENTRY 28/29 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) See inside back cover K Dash Clamp 32/33 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) fold-out or pages 13 and 14 Size Dia No. 36 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) for Tables I and II. 03 .125 (3.2) 02 40 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) 03 .188 (4.8) 03 03 .250 (6.4) 04 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 04 .312 (7.9) 05 2. Metric dimensions (mm) are indicated in parentheses. 06 .375 (9.5) 06 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 06 .438 (11.1) 07 4. Consult factory for shorter lengths on straight backshells. 08 .500 (12.7) 08 5. When using Connector Designator B refer to pages 18 and 19 for part number development. 10 .562 (14.3) 09 6. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. 10 .625 (15.9) 10 12 .688 (17.5) 11 TABLE X: CABLE ENTRY 12 .750 (19.1) 12 T V Cable Range Clamp 16 .812 (20.6) 13 Max Max Size Min Max 16 .875 (22.2) 14 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) 04 16 .938 (23.8) 15 .780 (19.8) 1.145 (29.1) 06 .250 (6.4) .437 (11.1) 20 1.000 (25.4) 16 .780 (19.8) 1.332 (33.8) .387 (9.8) .562 (14.3) 08 20 1.062 (27.0) 17 .780 (19.8) 1.332 (33.8) 10 .350 (8.9) .625 (15.9) 20 1.125 (28.6) 18 .811 (20.6) 1.551 (39.4) 12 .500 (12.7) .750 (19.1) 20 1.250 (31.8) 20 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 24 1.375 (34.9) 22 1.092 (27.7) 2.113 (53.7) 20 .875 (22.2) 1.250 (31.8) 28 1.500 (38.1) 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 Clamp X W Size Max Max 03* .437 (11.1) .760 (19.3) 04* .437 (11.1) .760 (19.3) 06* .500 (12.7) .760 (19.3) 08 .563 (14.3) .760 (19.3) 10 .563 (14.3) .760 (19.3) 12 .563 (14.3) .760 (19.3) 16 .656 (16.7) 1.073 (27.3) 20 .656 (16.7) 1.323 (33.6) 24 .656 (16.7) 1.323 (33.6) 28 1.188 (30.2) 1.572 (39.9) * Not available in Style M clamp. © 2005 Glenair, Inc. TABLE XI: CABLE ENTRY Y Z Cable Range Max Min ** Max Max .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) ** Not Applicable Style D CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 443 - Page 7 Rev. 20-AUG-2008 443 443-010 EMI/RFI Cable Sealing Backshell