443FN009NF22

443-009 Submersible EMI/RFI Cable Sealing Backshell Band-in-a-Can with Strain-Relief Direct Coupling - Full Radius Profile 443 F N 009 NF 16 12 H K P 443 CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile M = 45° N = 90° See page 443-2 for straight Basic Part No. Finish (Table II) Polysulfide (Omit for none) B = Band K = Precoiled Band (Omit for none) Strain Relief Style (H, A, M, D, Tables X, & XI) Dash No. (Table IV) Shell Size (Table I) O-Ring O- Ring A-F-H-L-S ROTATABLE COUPLING .88 (22.4) Max A Thread (Table I) E (Table III) G (Table III) C Typ. (Table I) F (Table III) 1.25 (31.8) Max STYLE 2 (See Note 1) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option J (Table IV) H (Table III) Band Option (K Option Shown See Note 4) Polysulfide Stripes P Option STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 443 - Page 4 Band-in-a-Can with Strain-Relief Direct Coupling - Full Radius Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E F G Conn. Desig. Max Max Max A-F-L-S H .817 (20.8) 1.057 (26.8) 1.125 (28.6) 09 08 .861 (21.9) 1.111 (28.2) 1.250 (31.8) 11 10 .911 (23.1) 1.161 (29.5) 1.375 (34.9) 13 12 .965 (24.5) 1.215 (30.9) 1.500 (38.1) 15 14 17 1.014 (25.8) 1.264 (32.1) 1.625 (41.3) 16 19 1.064 (27.0) 1.314 (33.4) 1.750 (44.5) 18 21 1.118 (28.4) 1.368 (34.7) 1.875 (47.6) 20 23 1.172 (29.8) 1.422 (36.1) 2.000 (50.8) 22 25 1.221 (31.0) 1.471 (37.4) 2.125 (54.0) 24 TABLE IV: CABLE ENTRY J Dash Clamp Dia No. Size .125 (3.2) 02 03 .188 (4.8) 03 03 .250 (6.4) 04 03 .312 (7.9) 05 04 .375 (9.5) 06 06 .438 (11.1) 07 06 .500 (12.7) 08 08 .562 (14.3) 09 10 .625 (15.9) 10 10 .688 (17.5) 11 12 .750 (19.1) 12 12 .812 (20.6) 13 16 .875 (22.2) 14 16 .938 (23.8) 15 16 16 20 1.000 (25.4) 17 20 1.062 (27.0) 18 20 1.125 (28.6) 20 20 1.250 (31.8) 22 24 1.375 (34.9) 24 28 1.500 (38.1) H Max 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) 2.250 (57.2) 2.375 (60.3) T Clamp Max Size 04 .780 (19.8) 06 .780 (19.8) 08 .780 (19.8) 10 .780 (19.8) 12 .811 (20.6) 16 .905 (23.0) 20 1.092 (27.7) 24 1.124 (28.5) 28 1.399 (35.5) TABLE X: CABLE ENTRY V Cable Range Min Max Max .125 (3.2) .312 (7.9) .957 (24.3) .250 (6.4) .437 (11.1) 1.145 (29.1) .387 (9.8) .562 (14.3) 1.332 (33.8) .350 (8.9) .625 (15.9) 1.332 (33.8) .500 (12.7) .750 (19.1) 1.551 (39.4) .625 (15.9) .937 (23.8) 1.770 (45.0) .875 (22.2) 1.250 (31.8) 2.113 (53.7) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) TABLE XI: CABLE ENTRY Clamp W X Y Z Cable Range Size Max Max Max Min ** Max Max 03*.437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04*.437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06*.500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08.563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 10.563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12.563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16.656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 20.656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 24.656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) * Not available in Style M clamp. ** Not Applicable Style D 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. O-Ring not supplied with Connector Designator A. 4. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 443 - Page 5 443 443-009 Submersible EMI/RFI Cable Sealing Backshell