443SH011NF10

443-011 -EMI/RFI Cable Sealing Backshell Band-in-a-Can with Strain-Relief Self-Locking Rotatable Coupling - Standard Profile 443 F S 011 NF 16 12-8 H K P 443 CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile H = 45° J = 90° S = Straight Basic Part No. Finish (Table II) Shell Size (Table I) A Thread (Table I) Length * O-Rings Polysulfide (Omit for none) B = Band K = Precoiled Band (Omit for none) Strain Relief Style (H, A, M, D, Tables X &XI) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Dash No. (Table IV) 1.25 (31.8) Max A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING Length ± .060 (1.52) Min. Order Length 2.5 inch E Typ. (Table I) K (Table IV) STYLE 2 (STRAIGHT See Note 1) 1.00 (25.4) Max Anti-Rotation Device (Typ.) * Length ± .060 (1.52) Min. Order Length 2.0 inch (Consult factory for shorter lengths) F (Table III) H (Table III) G (Table III) STYLE 2 (45° & 90° See Note 1) J (Table III) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option Band Option (K Option Shown See Note 4) © 2005 Glenair, Inc. Polysulfide Stripes P Option CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 443 - Page 10 Rev. 20-AUG-2008 Band-in-a-Can with Strain-Relief Self-Locking Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 F Max .795 (20.2) .820 (20.8) .844 (21.4) .861 (21.9) .888 (22.6) .904 (23.0) .929 (23.6) .956 (24.3) .979 (24.9) G Max 1.380 (35.1) 1.410 (35.8) 1.430 (36.3) 1.460 (37.1) 1.480 (37.6) 1.490 (37.8) 1.510 (38.4) 1.550 (39.4) 1.580 (40.1) H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) J Max 1.500 (38.1) 1.550 (39.4) 1.610 (40.9) 1.680 (42.7) 1.740 (44.2) 1.760 (44.7) 1.820 (46.2) 1.900 (48.3) 1.970 (50.0) TABLE IV: CABLE ENTRY K Dash Clamp Dia No. Size .125 (3.2) 02 03 .188 (4.8) 03 03 .250 (6.4) 04 03 .312 (7.9) 05 04 .375 (9.5) 06 06 .438 (11.1) 07 06 .500 (12.7) 08 08 .562 (14.3) 09 10 .625 (15.9) 10 10 .688 (17.5) 11 12 .750 (19.1) 12 12 .812 (20.6) 13 16 .875 (22.2) 14 16 .938 (23.8) 15 16 1.000 (25.4) 16 20 1.062 (27.0) 17 20 1.125 (28.6) 18 20 1.250 (31.8) 20 20 1.375 (34.9) 22 24 1.500 (38.1) 24 28 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. O-Ring not supplied with Connector Designator A. 3. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. TABLE X: CABLE ENTRY T V Cable Clamp Max Size Max Min .780 (19.8) .957 (24.3) .125 (3.2) 04 .780 (19.8) 1.145 (29.1) 06 .250 (6.4) .780 (19.8) 1.332 (33.8) .387 (9.8) 08 .780 (19.8) 1.332 (33.8) 10 .350 (8.9) .811 (20.6) 1.551 (39.4) 12 .500 (12.7) .905 (23.0) 1.770 (45.0) .625 (15.9) 16 1.092 (27.7) 2.113 (53.7) 20 .875 (22.2) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 24 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 28 Range Max .312 (7.9) .437 (11.1) .562 (14.3) .625 (15.9) .750 (19.1) .937 (23.8) 1.250 (31.8) 1.375 (34.9) 1.625 (41.3) TABLE XI: CABLE ENTRY Clamp Z Y X W Cable Range Size Max Max Max Max Min ** Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) * Not available in Style M clamp. ** Not Applicable Style D STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE D Medium Duty (Table XI) .135 (3.4) Max Cable Range V Cable Range Y Cable Range Y Cable Entry Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 443 - Page 11 Rev. 20-AUG-2008 443 443-011 EMI/RFI Cable Sealing Backshell