447AJ426NF16

447-426 EMI/RFI Non-Environmental Band-in-a-Can Backshell with Cable Clamp Strain-Relief Direct Coupling - Standard Profile 447 F S 426 NF 16 12-8 K P 447 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 4 CONNECTOR DESIGNATORS * Product Series Connector Designator Angle and Profile H = 45 J = 90 S = Straight Basic Part No. Polysulfide (Omit for none) B = Band K = Precoiled Band (Omit for none) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Cable Entry (Table V) DIRECT COUPLING Finish (Table II) Shell Size (Table I) Length ± .060 (1.52) Min. Order Length 2.5 inch (Note 3) Length ± .060 (1.52) Min. Order Length 3.0 Inch (See Note 3) A Thread (Table I) .500 (12.7) Max B (Table I) K ** Cable Range L ** STYLE 2 (STRAIGHT See Note 1) J (Table III) E (Table IV) F (Table IV) B (Table I) J (Table III) G (Table IV) ** (Table V) B (Table I) H (Table IV) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option Polysulfide Stripes P Option © 2005 Glenair, Inc. Band Option (K Option Shown See Note 5) CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 447 - Page 12 with Cable Clamp Strain-Relief Direct Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 10/12 .664 (16.9) 1.410 (35.8) .810 (20.6) 14 .688 (17.5) 1.430 (36.3) .870 (22.1) 16/18 .732 (18.6) 1.480 (37.6) .980 (24.9) 20 .748 (19.0) 1.490 (37.8) 1.020 (25.9) 22 .773 (19.6) 1.510 (38.4) 1.080 (27.4) 24 .800 (20.3) 1.550 (39.4) 1.140 (29.0) 28 .823 (20.9) 1.580 (40.1) 1.200 (30.5) 32 1.041 (26.4) 1.750 (44.5) 1.480 (37.6) H Max 1.550 (39.4) 1.610 (40.9) 1.740 (44.2) 1.760 (44.7) 1.820 (46.2) 1.900 (48.3) 1.970 (50.0) 2.210 (56.1) Dash No. 10 12 14 16 18 20 22 24 28 32 K ±.030 .220 .310 .440 .560 .630 .750 .880 1.000 1.060 1.190 TABLE V: CABLE RANGE Cable Range L Max Min ±(.8) Max .130 (3.3) .250 (6.4) (5.6) 1.000 (25.4) .250 (6.4) .380 (9.7) (7.9) 1.250 (31.8) .310 (7.9) .440 (11.2) (11.2) 1.340 (34.0) .375 (9.5) .630 (16.0) (14.2) 1.470 (37.3) .560 (14.2) .690 (17.5) (16.0) 1.560 (39.6) .630 (16.0) .750 (19.1) (19.1) 1.620 (41.1) .750 (19.1) .880 (22.4) (22.4) 1.750 (44.5) .880 (22.4) 1.000 (25.4) (25.4) 1.870 (47.5) (26.9) 1.970 (50.0) 1.000 (25.4) 1.130 (28.7) (30.2) 2.090 (53.1) 1.130 (28.7) 1.250 (31.8) 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. When using Connector Designator B refer to pages 18 and 19 for part number development. 5. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 447 - Page 13 447 447-426 EMI/RFI Non-Environmental Band-in-a-Can Backshell