447AS425NF18

447-425 EMI/RFI Non-Environmental Band-in-a-Can Backshell with Cable Clamp Strain-Relief Rotatable Coupling - Standard Profile 447 F S 425 NF 16 12-8 K P 447 CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile H = 45 J = 90 S = Straight Basic Part No. Polysulfide (Omit for none) B = Band K = Precoiled Band (Omit for none) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Cable Entry (Table IV) A-F-H-L-S ROTATABLE COUPLING Finish (Table II) Shell Size (Table I) Length ± .060 (1.52) Min. Order A Thread Length 2.5 inch (Table I) Length * .500 (12.7) Max C Typ. (Table I) * Length ± .060 (1.52) Min. Order Length 2.0 inch (Note 3) E .88 (22.4) Max (Table III) K ** Cable Range L ** STYLE 2 (STRAIGHT See Note 1) ** (Table IV) G (Table III) F (Table III) STYLE 2 (45° & 90° See Note 1) H (Table III) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option Band Option (K Option Shown See Note 4) © 2005 Glenair, Inc. Polysulfide Stripes P Option CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 447 - Page 6 with Cable Clamp Strain-Relief Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 E Max .639 (16.2) .664 (16.9) .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) F Max 1.380 (35.1) 1.410 (35.8) 1.430 (36.3) 1.460 (37.1) 1.480 (37.6) 1.490 (37.8) 1.510 (38.4) 1.550 (39.4) 1.580 (40.1) G Max .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) H Max 1.500 (38.1) 1.550 (39.4) 1.610 (40.9) 1.680 (42.7) 1.740 (44.2) 1.760 (44.7) 1.820 (46.2) 1.900 (48.3) 1.970 (50.0) Dash No. 10 12 14 16 18 20 22 24 28 32 K ±.030 .220 .310 .440 .560 .630 .750 .880 1.000 1.060 1.190 TABLE IV: CABLE ENTRY Cable Range L Max Min ±(.8) Max .130 (3.3) .250 (6.4) (5.6) 1.000 (25.4) .250 (6.4) .380 (9.7) (7.9) 1.250 (31.8) .310 (7.9) .440 (11.2) (11.2) 1.340 (34.0) .375 (9.5) .630 (16.0) (14.2) 1.470 (37.3) .560 (14.2) .690 (17.5) (16.0) 1.560 (39.6) .630 (16.0) .750 (19.1) (19.1) 1.620 (41.1) .750 (19.1) .880 (22.4) (22.4) 1.750 (44.5) .880 (22.4) 1.000 (25.4) (25.4) 1.870 (47.5) (26.9) 1.970 (50.0) 1.000 (25.4) 1.130 (28.7) (30.2) 2.090 (53.1) 1.130 (28.7) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. Now Available with the NESTOR Add “-445” to Specify Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. See Page 41 for Details. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 447 - Page 7 447 447-425 EMI/RFI Non-Environmental Band-in-a-Can Backshell