447FJ420NF08

447-420 EMI/RFI Non-Environmental Band-in-a-Can Backshell with QwikClamp Strain-Relief Rotatable Coupling - Standard Profile 447 F S 420 NF 16 12-8 K P Product Series Polysulfide (Omit for none) B = Band K = Precoiled Band (Omit for none) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Cable Entry (Table IV) Finish (Table II) Length ± .060 (1.52) Min. Order Length 2.5 inch Shell Size (Table I) A Thread (Table I) Length * L (Table IV) 447 CONNECTOR DESIGNATORS Connector Designator Angle and Profile H = 45 J = 90 S = Straight Basic Part No. A-F-H-L-S ROTATABLE COUPLING C Typ. (Table I) * Length ± .060 (1.52) Min. Order Length 2.0 inch (See Note 3) K ** Cable Entry N ** STYLE 2 (STRAIGHT See Note 1) ** (Table IV) M** U.S. Patent 5211576 Internal Mechanical Strain Relief Anti-Rotation G (Table III) .88 (22.4) Max E (Table III) F (Table III) STYLE 2 (45° & 90° See Note 1) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option H (Table III) Band Option (K Option Shown See Note 4) © 2005 Glenair, Inc. Polysulfide Stripes P Option CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 447 - Page 2 with QwikClamp Strain-Relief Rotatable Coupling - Standard Profile See inside back cover foldout or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 09 08 10 11 13 12 15 14 16 17 19 18 20 21 23 22 25 24 E Max .639 (16.2) .664 (16.9) .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) F Max 1.380 (35.1) 1.410 (35.8) 1.430 (36.3) 1.460 (37.1) 1.480 (37.6) 1.490 (37.8) 1.510 (38.4) 1.550 (39.4) 1.580 (40.1) G Max .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) H Max 1.500 (38.1) 1.550 (39.4) 1.610 (40.9) 1.680 (42.7) 1.740 (44.2) 1.760 (44.7) 1.820 (46.2) 1.900 (48.3) 1.970 (50.0) K Dash Clamp Dia No. Size (Ref) .125 (3.2) 02 08 .188 (4.8) 03 08 .250 (6.4) 04 08 .312 (7.9) 05 12 .375 (9.5) 06 12 .438 (11.1) 07 16 .500 (12.7) 08 16 .562 (14.3) 09 20 .625 (15.9) 10 20 .688 (17.5) 11 24 .750 (19.1) 12 24 .812 (20.6) 13 28 .875 (22.2) 14 28 .938 (23.8) 15 32 1.000 (25.4) 16 32 1.062 (27.0) 17 36 1.125 (28.6) 18 36 1.250 (31.8) 20 40 1.375 (34.9) 22 44 1.500 (38.1) 24 48 TABLE IV: CABLE ENTRY L M N Max Max Max .970 (24.6) .530 (13.5) .720 (18.3) .970 (24.6) .530 (13.5) .720 (18.3) .970 (24.6) .530 (13.5) .720 (18.3) 1.110 (28.2) .710 (18.0) .910 (23.1) 1.110 (28.2) .710 (18.0) .910 (23.1) 1.210 (30.7) .720 (18.3) 1.090 (27.7) 1.210 (30.7) .720 (18.3) 1.090 (27.7) 1.210 (30.7) .720 (18.3) 1.220 (31.0) 1.210 (30.7) .720 (18.3) 1.220 (31.0) 1.210 (30.7) .660 (16.8) 1.340 (34.0) 1.360 (34.5) .660 (16.8) 1.340 (34.0) 1.360 (34.5) .790 (20.1) 1.530 (38.9) 1.510 (38.4) .790 (20.1) 1.530 (38.9) 1.510 (38.4) .870 (22.1) 1.720 (43.7) 1.510 (38.4) .870 (22.1) 1.720 (43.7) 1.510 (38.4) .830 (21.1) 1.850 (47.0) 1.510 (38.4) .830 (21.1) 1.850 (47.0) 1.510 (38.4) .820 (20.8) 1.970 (50.0) 1.510 (38.4) .910 (23.1) 2.090 (53.1) 1.510 (38.4) .900 (22.9) 2.280 (57.9) Cable Min .100 (2.5) .098 (2.5) .098 (2.5) .203 (5.2) .203 (5.2) .328 (8.3) .328 (8.3) .452 (11.5) .452 (11.5) .515 (13.1) .515 (13.1) .640 (16.3) .640 (16.3) .765 (19.4) .765 (19.4) .859 (21.8) .859 (21.8) .984 (25.0) 1.125 (28.6) 1.250 (31.8) Range Max .250 (6.4) .200 (5.1) .250 (6.4) .375 (9.5) .375 (9.5) .500 (12.7) .500 (12.7) .625 (15.9) .625 (15.9) .750 (19.1) .750 (19.1) .875 (22.2) .875 (22.2) 1.000 (25.4) 1.000 (25.4) 1.125 (28.6) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. © 2005 Glenair, Inc. CAGE Code 06324 Now Available with the NESTOR Add “-445” to Specify Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. See Page 41 for Details. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 447 - Page 3 447 447-420 EMI/RFI Non-Environmental Band-in-a-Can Backshell