447FJ425N18

447-425 EMI/RFI Non-Environmental Band-in-a-Can Backshell With Cable Clamp Strain-Relief Rotatable Coupling - Standard Profile Basic Number Connector Designator F and H Finish Cable Entry Connector Accessories MIL-DTL-38999 Series I, II (F) MIL-DTL-38999 Series III and IV (H) Connector Designators: ROTATABLE COUPLING F-H 447 Product Series F S 425 Contact Style H J S - 45° - 90° - Straight M 18 12 - 5 Shell Size Length: S only (1/2 inch increments, e.g. 8 = 4.00 inches) Length (See Note 2) A Thread Typ (See Note 1) Length (see Note 2) .500 (12.7) Max Typ See Note 6 B Type (See Note 1) Cable Entry Typ K Typ L Typ STRAIGHT .880 (22.4) Max E (See Note 3) STYLE II Knurl Style Mfr Option Typ SYMBOL ‘S’ STRAIGHT G H J Ref Typ F J Ref Typ SYMBOL J 90° SYMBOL H 45° G © 2008 Glenair, Inc. www.glenair.com CAGE CODE 06324 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 G-22 Rotatable Coupling - Standard Profile TABLE III: BACKSHELL DIMENSIONS Shell Size F H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 E Max. 0.75 (1.9) 0.81 (2.1) 0.87 (2.2) 0.92 (2.3) 0.98 (2.5) 1.02 (2.6) 1.08 (2.7) 1.14 (2.9) 1.20 (3.0) F Max. 1.5 (3.8) 1.55 (3.9) 1.61 (4.1) 1.68 (4.3) 1.74 (4.4) 1.76 (4.5) 1.82 (4.6) 1.90 (4.8) 1.97 (5.0) G Max. 0.639 (1.6) 0.664 (1.7) 0.688 (1.7) 0.705 (1.8) 0.732 (1.9) 0.748 (1.9) 0.773 (2.0) 0.800 (2.0) 0.823 (2.1) H Max. 1.38 (3.5) 1.41 (3.6) 1.43 (3.6) 1.46 (3.7) 1.48 (3.8) 1.49 (3.8) 1.51 (3.8) 1.55 (3.9) 1.58 (4.0) J Ref. 0.45 (1.1) 0.58 (1.5) 0.69 (1.8) 0.82 (2.1) 0.94 (2.4) 1.03 (2.6) 1.16 (2.9) 1.28 (3.3) 1.41 (3.6) Max. Dash No. (F, H) 01 02 04 05 06 06 07 08 09 TABLE IV: CABLE ENTRY Dash No. 1 2 3 4 5 6 7 8 9 10 K Max. 0.843 (2.1) 0.968 (2.5) 1.046 (2.7) 1.156 (2.9) 1.218 (3.1) 1.343 (3.4) 1.468 (3.7) 1.593 (4.0) 1.718 (4.4) 1.843 (4.7) L Max. 0.78 (2.0) 0.97 (2.5) 1.05 (2.7) 1.15 (2.9) 1.22 (3.1) 1.34 (3.4) 1.47 (3.7) 1.59 (4.0) 1.72 (4.4) 1.84 (4.7) Cable Entry Min. 0.125 (0.3) 0.156 (0.4) 0.250 (0.6) 0.280 (0.7) 0.375 (1.0) 0.500 (1.3) 0.625 (1.6) 0.750 (1.9) 0.875 (2.2) 1.000 (2.5) Max. 0.250 (0.6) 0.375 (1.0) 0.438 (1.1) 0.500 (1.3) 0.625 (1.6) 0.750 (1.9) 0.875 (2.2) 1.000 (2.5) 1.125 (2.9) 1.250 (3.2) TABLE II: FINISHES Symbol B C GB M N NF MT Z1 ZL ZN Finish Cadmium Plate, Olive Drab Anodize, Black Black Anodize, Hard Coat Electroless Nickel Cad Plate, Olive Drab over Electroless Nickel Cadmium Plate, Olive Drab over Electroless Nickel Ni-PTFE 1000 Hour GreyTM Nickel Fluorocarbon Polymer Stainless Steel Passivate CRES, Electroless Nickel Zinc-Nickel APPLICATION NOTES 1. Standard minimum length for Style I is 1 inch (25.4), Style II is 1.5 inches (38.1). Consult factory about shorter lengths (Note: Applies to Symbol S Straight only). When cable diameter exceeds “Max Dash No” in Table I, Style II will be supplied. For effective grounding, connector with conductive finish should be used. Glenair Series 600 Backshell Assembly tools are recommended for assemply and installation. 5. 6. For shield termination see Glenair Drawings 600-050 and 600-052. Material/Finish: Adapters, Elbows, Coupling Nuts, Ferrule, Clamp - Al Alloy/See Table I Hardware - Cres/Passivate Metric dimensions (mm) are indicated in parentheses. 2. 3. 4. 7. © 2008 Glenair, Inc. www.glenair.com CAGE CODE 06324 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 G-23 Connector Accessories 447-425 EMI/RFI Non-Environmental Band-in-a-Can Backshell With Cable Clamp Strain-Relief G